6-inch submersible sand pump, high flow wear-resistant sand pump

Description :

　　The overcurrent components of the 6-inch submersible sand pump, including the pump body, pump cover, and impeller, are made of wear-resistant materials. This product has excellent material selection, advanced structure, wide flow channels, and powerful capabilities. It is widely used in metallurgy, chemical industry, mining, coal, electricity, building materials, municipal environmental protection, and river dredging. It is used for transporting sand, coal slag, and tailings, such as liquids containing abrasive solid particles.

　　6-inch submersible sand pump, high flow wear-resistant sand pump, usage conditions:

　　1. The power supply is 50Hz or 60Hz/230V/380V/415V/660V/1440V. The capacity of a three-phase AC power supply is 2-3 times the rated capacity of the motor.

　　2. The medium temperature shall not exceed 50 ℃, and the R-type shall be 120 ℃ (not exceeding 140 ℃), and it shall not contain flammable and explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. Diving depth: not exceeding 40 meters, the small diving depth depends on the diving motor.

　　5. The working position of the device in the medium is vertical, with the upper part suspended and positioned.

　　Usage:

　　Operate and use according to the conditions provided in the product manual. Due to the risk of leakage in submersible pumps, special attention should be paid to the basic requirements for safe use:

　　1. Do not forcefully pull the cable out of the pump.

　　2. The power cord must have a leakage protection device.

　　3. During installation or maintenance, the power must be cut off.

　　4. Cannot operate for a long time without water. In addition, submersible sand pumps should be used reasonably according to the technical parameters of the product (flow rate and head) to extend the service life of the product. If you work and flow for a long time under non rated water head, it is easy to burn out the submersible motor.

　　6-inch submersible sand pump, high flow wear-resistant sand pump, usage:

　　1. Drainage, rivers, lakes, reservoirs, and ports

　　2. Dredging the sandy soil in rivers, lakes, and oceans

　　3. Coastal land reclamation

　　4. Engineering construction sediment drainage, mud

　　5. Remove sediment from municipal pipelines and rainwater pumping stations

　　6. Sedimentation tanks in steel plants, processing plants, coal tanks in power plants, and oxidation tanks in sewage treatment plants

　　7 Steel Plant Blast Furnace Slag and Slag Transportation

　　8. Transportation of slag, slag and slurry in the beneficiation plant

　　9. Remove coal slag, coal slurry, and coal slurry

　　10 Coal slurry transportation.

　　11. Absorb various solid particles of corundum, quartz sand, and steel slag.

　　12. Mineral processing, gold mining, iron ore

　　13. Transport slurry containing various impurities

　　14. Transport other media containing larger solid particles

　　Maintenance method:

　　Users should maintain according to the requirements of the product manual. The maintenance issues encountered should be resolved by personnel with skills and relevant knowledge. Especially after a period of use, please check if the electrical insulation meets the requirements. If maintenance or use is improper, repair or maintenance should be carried out when insulation resistance is low, cables are damaged or machines rust, operation is difficult, and starting current increases. Prevent safety accidents or further damage to the machine.

　　Friendly reminder: Please identify the manufacturer and do not be deceived and cause unnecessary economic losses.

AfterSalesService :

• 6-inch submersible sand pump