Centrifugal principle sand suction pump _ Wear resistant submersible sand suction pump

Description :

　　Centrifugal principle sand suction pump - The flow components of the wear-resistant submersible sand suction pump (including the pump body, pump cover, and impeller) are made of wear-resistant materials. This product has excellent material selection, advanced structure, wide flow channel, and strong permeability. It is widely used in metallurgy, chemical industry, mining, coal, electricity, building materials, municipal environmental protection, and river dredging, and is used for transporting sand, coal slag, and tailings. And other liquids containing abrasive solid particles.

　　Widely used:

　　1. Dredging of rivers, lakes, reservoirs, and ports.

　　2. Extract sand from rivers, lakes, and other bodies of water.

　　3. Land reclamation in coastal areas.

　　4. Sand and mud in drainage engineering construction.

　　5. Cleaning of sediment in municipal pipelines and rainwater pump stations.

　　6. Clean the sedimentation tanks of steel plants, mineral processing plants, power plant coal tanks, and oxidation ditch sedimentation tanks of sewage treatment plants.

　　7. Transportation of slag and blast furnace slag from steel plants.

　　8. Transport tailings, slag, and coal slurry from the beneficiation plant

　　9. Remove coal slag, coal slurry, and coal slurry.

　　10. Transportation of fly ash, coal slurry, and coal slurry from power plants.

　　11. Absorb various solid particles of diamond sand, quartz sand, and steel slag.

　　12. Mineral processing, gold mining, and iron extraction.

　　13. Transport slurries containing various impurities.

　　14. Transport other media containing larger solid particles.

　　Centrifugal principle sand suction pump _ Wear resistant submersible sand suction pump Main features:

　　Firstly, slurry pumps have high operating efficiency and low losses.

　　Secondly, the overcurrent components of the pump have a relatively long service life, thereby saving production costs.

　　Thirdly, the entire industrial and mining system operates stably and will not be affected by pump operation issues.

　　Usage conditions:

　　1. The power supply is 50Hz or 60Hz/230V/380V/415V/660V/1440V, three-phase AC power supply, and the capacity of the distribution transformer is three times the rated capacity of the motor.

　　2. The temperature of the medium should not exceed 50 ° C, and the R-type medium should not exceed 120 ° C (not exceeding 140 ° C), and it should not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. Diving depth of the pump: not exceeding 40 meters, the low diving depth depends on the diving motor.

　　5. The working position of the pump in the medium is vertical, and the installation method can be selected as lifting type.

　　Usage:

　　Please operate according to the conditions specified in the product manual. Due to the risk of electric leakage in submersible pump products, special attention should be paid to the basic requirements for safe use:

　　1. Do not use force to pull the electric pump to guide the cable,

　　2. The power cord must have a leakage protection device

　　3. The power must be cut off during installation or maintenance.

　　4. Applications cannot be run for long periods of time without water.

　　In addition, submersible sand pumps should be used reasonably according to the technical parameters of the product (flow rate and head) to extend the service life of the product. If you work for a long time under non rated water head and flow for a long time, it is easy to burn the submersible motor.

　　Centrifugal principle sand suction pump - Maintenance method for wear-resistant submersible sand suction pump:

　　Users should perform maintenance according to the requirements of the product manual. When encountering maintenance problems, they should be solved by personnel with technical and relevant knowledge. Especially after using the product for a period of time, it should be checked whether the electrical insulation meets the requirements. If maintenance or use is improper, and insulation resistance is found to be low, cables are damaged, or the machine is corroded and difficult to operate, and the starting current increases, timely repair or maintenance should be carried out to prevent safety accidents or further damage to the machine.

　　Friendly reminder: Please identify the manufacturer and do not be deceived and cause unnecessary economic losses.

　　During the warranty period; Under the condition that the conveying medium meets the requirements of the pump's overcurrent components and can comply with the user manual, if the product is damaged or cannot work properly due to manufacturing defects, our factory will replace or repair it free of charge, and vulnerable parts are not included in this period. One year warranty/wooden box packaging, available or customizable. For more details, please call us for consultation!

AfterSalesService :

• Centrifugal principle sand suction pump