Manufacturer supplies alloy steel wear-resistant submersible sand pump CSQ150-30-30

Description :

　　The manufacturer supplies alloy steel wear-resistant submersible sand pumps CSQ150-30-30 with outlet diameters. The products are divided into multiple specification series such as 2 inches, 3 inches, 4 inches, 6 inches, 8 inches, 10 inches, and 12 inches. The power range is from 3KW-132KW and will be shipped within 2-3 days after payment. We can also customize according to customers' special requirements!

　　Structural features:

　　1. The device can work directly underwater without water noise and vibration, and the site is clean and tidy.

　　2. Not limited by the suction stroke, no cavitation phenomenon, high slag absorption efficiency, and more thorough sludge removal.

　　3. The pump consists of a pump body, impeller, guard plate, motor frame, volute, mechanical seal, bearing components, etc. The structure is simple and not easily damaged.

　　4. The main flow components such as impellers and stirring impellers are made of highly wear-resistant materials, which have the characteristics of wear resistance, corrosion resistance, non clogging, strong slag discharge ability, and can effectively pass through larger solid particles.

　　5. At the same time, an electric mixer can also be installed on the equipment.

　　When viewed from the drive end, the rotation direction of the pump is clockwise.

　　Manufacturer supplies alloy steel wear-resistant submersible sand pump CSQ150-30-30 for use:

　　1. Drainage of rivers, lakes, reservoirs and ports, sand extraction and discharge of sewage.

　　2. Sand, mud, sewage, and impurities discharged during construction.

　　3. Clean the sludge, silt, and sand in sedimentation tanks (such as sewage treatment plants, steel plants, and thermal power plants).

　　4. Discharge of high-temperature waste residue, boiler high-temperature powder residue, heat-resistant oxide skin, metallurgical and other high-temperature slag.

　　5. Tailings transportation, various tailings, slurry, coal slurry, slag, slag treatment, etc.

　　Model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear and tear submersible mud pump

　　100- Rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated motor power [kw]

　　CSQX: Stainless steel submersible mud pump CSQL: Cooling submersible cement sand pump

　　CSQR: High temperature resistant submersible cement sand pump CSQRX: High temperature resistant stainless steel submersible cement sand pump

　　Manufacturer supplies alloy steel wear-resistant submersible sand pump CSQ150-30-30. Service conditions:

　　1. The normal power supply is 50Hz/380V three-phase AC power supply, which can be customized as 60HZ/440V, 480V, 660V, 1140V irregular power supply.

　　2. The medium temperature should not exceed 60 ℃. If the medium temperature exceeds 60 ℃, a high-temperature motor should be used. The medium does not contain flammable or explosive substances.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. Diving depth for crew: limited by the submersible, not exceeding 60 meters.

　　5. The working position of the pump in the medium is vertical, and the working state is continuous.

　　A high-quality manufacturer of wear-resistant sand pumps. One year warranty, if you are not satisfied, you can return it directly. Our high chromium alloy wear-resistant sand pump models are available for online consultation. We have the strength to offer good prices! Both can ensure that the steel saw blade does not move and the pump can run continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer.

　　Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• Manufacturers supply submersible sand pumps