Wear resistant submersible sand pump, high chromium alloy stirring sand pump

Description :

　　The flow components of the wear-resistant submersible sand pump, including the pump body, pump cover, and impeller, are made of wear-resistant materials. This product has excellent material selection, advanced structure, wide flow channel, and strong permeability. It is widely used in metallurgy, chemical industry, mining, coal, electricity, building materials, municipal environmental protection, and river dredging, and is used for transporting sand, coal slag, and tailings. And other liquids containing abrasive solid particles.

　　Structural composition:

　　1. It mainly consists of a motor, pump body, impeller, guard plate, pump cover, and bearings.

　　2. The pump body, impeller, and guard plate are all made of high chromium alloy wear-resistant materials.

　　3. The shaft seal of the pump adopts three sets of hard alloy mechanical seals to ensure the normal operation of the pump.

　　In addition to the main impeller, the product is also equipped with a stirring impeller at the bottom of the pump.

　　Wear resistant submersible sand pump, high chromium alloy stirring sand pump, purpose:

　　1. Sludge dredging of rivers, lakes, reservoirs, hydroelectric power plants, ports, etc.

　　2. Sediments and mud discharge during engineering construction, drainage during engineering construction, and drainage and silt during bridge pier construction.

　　3. Removal of sediment from municipal pipelines and rainwater pump stations

　　4. Sedimentation in factory sedimentation tanks, mine sedimentation silos, river dredging, beach sand mining, reservoir sediment cleaning, and well cleaning

　　5. High temperature slurry for phosphorus chemical industry, high-temperature slurry for boilers, heat-resistant sediment, chemical metallurgy, etc

　　6. Sludge discharge in buildings, discharge of corrosive liquids, and transportation of sludge in oil

　　7. Tailings transportation, various tailings, mud, ore slurry, coal slurry, slag, slag treatment, etc.

　　Wear resistant submersible sand pump, high chromium alloy stirring sand pump, model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud pump (submersible sand pump)

　　100- Rated flow rate (m3/h)

　　28- Rated head [m]

　　15- Rated power of motor (Kw)

　　CSQX: Stainless steel submersible mud pump CSQL: Self cooling submersible cement sand pump

　　CSQR: High temperature resistant submersible cement sand pump CSQRX: High temperature resistant stainless steel submersible cement sand pump

　　Technical Specifications:

　　Power: 3KW-132KW Flow: 10-2200m3/h

　　Head: 5 to 60m Speed: 1440r/min, 980r/min

　　Caliber: 50mm-300mm Temperature: -15 ℃ -+140 ℃

　　Particle size: within 5cm Material: wear-resistant alloy

　　Wear resistant submersible sand pump, high chromium alloy stirring sand pump, usage conditions:

　　1. The power supply is a three-phase AC power supply of 50Hz, 60Hz/230V, 380V, 480V, 660V, and 1140V. The capacity of the distribution transformer is 2-3 times the rated capacity.

　　2. The working position in the medium is vertical, and the working state is continuous.

　　3. Diving depth: not more than 60 meters, small diving depth is based on submerging the motor. If it is greater than 50 meters, please specify in advance for customization to avoid affecting the stability of the pump performance.

　　4. Solid particle concentration in the medium: 45% for ash and 60% for slag.

　　5. The temperature of the ordinary type shall not exceed 60 ℃, and the R type (high temperature resistant) shall not exceed 140 ℃, and shall not contain flammable and explosive gases.

　　Manufacturer of wear-resistant sand pumps. One year warranty, if not satisfied, return directly. High chromium alloy wear-resistant sand pump model online consultation, we have the strength to have good prices! Wear resistant sand pump prices, compare and choose! Not just giving you a choice of price! Each high wear-resistant pump produced ensures that the steel saw does not move, and the pump can operate continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer.

　　Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• Wear resistant submersible sand pump