High wear-resistant sand pump, high-power sand pump, manufacturer's direct sales of sediment pump

Description :

　　The high wear-resistant sand pump and high-power sand suction pump are designed and manufactured by absorbing advanced technologies from both domestic and foreign sources. The unique sealing device can effectively balance the pressure inside and outside the oil chamber, thereby limiting the reliability of mechanical seals. The motor has overheat protection and water inlet function. Under harsh working conditions, various protective measures such as detection and protection can operate safely for a long time. The pre mixed impeller of the pump can impact the deposited sludge into high concentration turbulence, so the pump can achieve high concentration sedimentation without the need for auxiliary equipment. It is used for transporting river sand, sand, coal slag, tailings, iron sand, mineral sand, and other liquids containing abrasive solid particles.

　　Features:

　　Firstly, slurry pumps have high operating efficiency and low losses.

　　Secondly, the overcurrent components of the pump have a relatively long service life, thereby saving production costs.

　　Thirdly, the entire industrial and mining system operates stably and will not be affected by pump operation issues.

　　High wear-resistant sand pump, high-power sand pump, and sediment pump. Application range:

　　1. Extract sand from rivers, lakes, oceans, and reservoirs.

　　2. Sparse and sparse, rivers, lakes, reservoirs, and ports.

　　3. Sand extraction and beneficiation, selection of sand extraction and iron, extraction of sand and gold, and selection of sand extraction and rare earth elements.

　　4. Clean the sedimentation tank of the sewage treatment plant.

　　5. Remove sediment from municipal pipelines, rainwater pumping stations, and hydropower stations.

　　6. Project construction (bridge construction, sinking well, etc.) discharges silt and mud.

　　7. Transportation of blast furnace slag, slag, and sediment in steel plants.

　　8. Transport tailings, slag, and slurry from the beneficiation plant.

　　9. Remove coal slag, coal slurry, and coal slurry.

　　10. Transportation of fly ash, coal slurry, and coal slurry from power plants.

　　11. Absorb solid particles of various types of diamond sand, quartz sand, and steel slag.

　　12. Extract powder from the tile factory.

　　13. Reclamation of coastal areas.

　　14. Transport slurries containing various impurities.

　　15. Transport other media containing larger solid particles.

　　High wear-resistant sand pump, high-power sand pump, sediment pump, meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible sand pump

　　100- Rated flow rate (m3/h)

　　28 rated head (m)

　　15 rated motor rated power (Kw)

　　CSQX: Stainless Steel Submersible Mud Pump CSQL: Self Cooling Submersible Mud Pump CSQR: High Temperature Resistant Submersible Cement Sand Pump CSQRX: High Temperature Resistant Stainless Steel Submersible Cement Sand Pump

　　Technical Specifications:

　　Head: 5-60m Flow rate: 10-2200m3/h

　　Power: 3KW-132KW Speed: 1440r/min 980r/min

　　Caliber: 50mm-300mm Temperature: -15 ℃ -+140 ℃

　　Particle size: within 50mm Material: High resistance running in steel (Cr26 alloy steel)

　　Usage conditions:

　　1. The power supply is 50Hz, 380V three-phase AC power supply (customized 60HZ is required).

　　2. The temperature of the medium should not exceed 60 ℃, and high-temperature resistant media should not exceed 140 ℃, and the medium should not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. The diving depth of the crew shall not exceed 60 meters, and the small diving depth must be 3/4 submerged in water.

　　5. Make the device work vertically in the medium, and the operation mode is continuous operation.

　　High wear-resistant sand pump, high-power sand pump, and sediment pump. Performance characteristics:

　　1. The overall equipment is simple. It can also be equipped with auxiliary mixing device or spray device, which is easy to operate and reduces the total investment of the device.

　　2. The overflow components such as impellers and mixing impellers are made of high hardness, high chromium cast steel, which has the characteristics of wear resistance, corrosion resistance, and sand extraction.

　　3. The channel is wide and has good anti clogging performance, which can pass through larger solid slag particles.

　　4. The sealing components of the pump are made of hard alloy mechanical seals, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.

　　5. The motor dives into the water without being limited by the suction stroke, with a high sand suction rate and more thorough sand removal.

　　A high-quality manufacturer of wear-resistant sand pumps. One year warranty, if you are not satisfied, you can return it directly. Our high chromium alloy wear-resistant sand pump models are available for online consultation. We have the strength to offer good prices! Both can ensure that the steel saw blade does not move and the pump can run continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer. Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• High wear-resistant sand pump