Small submersible sand pump with easy installation

Description :

　　Small submersible sand pumps with easy installation are widely used in sand extraction, iron sand extraction, gold mining, marine environment, fly ash transportation, tailings metallurgical industry transportation, etc. The mixed flow rate can reach 1000 cubic meters at a depth of 60 meters, suitable for various sand pumping environments that require high flow and deep water pumping. It is used to transport liquids containing abrasive solid particles, such as river sand, gravel, coal slag, tailings, iron sand, and ore.

　　Small submersible sand pump with easy installation model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud pump

　　100- Rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated power of electric motor (Kw)

　　CSQX: Stainless Steel Submersible Sand Pump CSQL: Self Cooling Submersible Sand Pump

　　CSQR: High temperature resistant submersible mud pump CSQRX: High temperature resistant stainless steel submersible mud pump

　　Features:

　　1. The slurry efficiency pump has extremely high and low losses.

　　The flow component of the pump has a relatively long service life, thereby saving production costs.

　　3. The entire industrial and mining system operates stably and will not be affected by the operation of pumps.

　　Usage conditions:

　　1. The power supply is a 50Hz, 60Hz/230V, 380V, 480V, 660V, 1140V three-phase AC power supply, with a capacity 2-3 times that of a distribution transformer.

　　The working position in the medium is vertical, and the working state is continuous.

　　3. Diving depth: not exceeding 60 meters, the small diving depth depends on the diving motor.

　　4. Solid particle concentration in the medium: ash content is 45%, slag is 60%.

　　5. The temperature of ordinary type should not exceed 60 ℃, and the temperature of R type (high temperature resistant) should not exceed 140 ℃, and it does not contain flammable and explosive gases.

　　Technical parameters of a small submersible sand pump with easy installation:

　　Power: 3KW-132KW Flow: 10-2200m3/h

　　Head: 5-60m Speed: 1440r/min, 980r/min

　　Caliber: 50mm-300mm Temperature: -15 ℃ -+140 ℃

　　Particle size: within 5 centimeters Material: High wear-resistant alloy (Cr26)

　　Scope of use:

　　1. Sedimentation tank, sinking well, and suction sludge and mud from water wells.

　　2. Gold mining sand, iron sand, steel sand, quartz sand, tailings, etc.

　　3. Sedimentation tanks, hydropower stations, reservoirs, rivers, power plants, sunken wells, mines, and fish ponds.

　　4. Dredging projects for rivers, lakes, reservoirs, urban rivers, etc.

　　5. The beneficiation plant transports tailings, slag, and slurry.

　　6. Removal of coal slag, coal slurry, and coal slurry.

　　7. Transportation of fly ash, coal slurry, and coal slurry in power plants.

　　8. Transport slurry containing various impurities

　　9. Transport other media containing larger solid particles

　　Features:

　　The whole machine is a dry electric pump structure. Style structure. The motor is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the interior of the motor.

　　In addition to the main impeller, there is also a stirring impeller that can stir the sediment deposited on the bottom of the water into turbulence and extract it.

　　3. The main flow components such as impellers and stirring impellers are made of high chromium alloy, which has the advantages of wear resistance, corrosion resistance, non clogging, and strong drainage capacity, and can effectively pass large solid particles.

　　4. Unrestricted by suction range, high slag suction efficiency and more thinning.

　　5. No need for auxiliary vacuum pump, reducing investment.

　　6. There is no need to equip auxiliary mixing or spray device, which makes the operation easier.

　　7. The motor is submerged in water, eliminating the need for complex grounding protection and fixing devices, making management easier.

　　8. The stirring impeller directly contacts the sedimentary surface, and the concentration is controlled by the diving depth, making concentration control more flexible.

　　9. The equipment works directly underwater without noise and vibration, making the site cleaner.

　　Manufacturer of wear-resistant sand pumps. One year warranty, if not satisfied, return directly. High chromium alloy wear-resistant sand pump model online consultation, we have the strength to have good prices! Wear resistant sand pump prices, compare and choose! Not just giving you a choice of price! Each high wear-resistant pump produced ensures that the steel saw does not move, and the pump can operate continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer.

　　Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory. The factory is located in China Pump City (Shandong Zibo Boshan)

　　This quotation is for reference only. The price varies depending on the power size. Please call us for more information!

AfterSalesService :

• Small sand pump