Alloy casting sand pump manufacturer, high-power stirring sand pump

Description :

　　The high-power stirring sand pump manufactured by the alloy casting sand pump manufacturer has undergone industrial testing and experimentation. It has the characteristics of high hydraulic efficiency, good wear resistance, and stable performance for transporting solid particle media. It has high efficiency, energy saving, wear resistance, corrosion resistance, reliable operation, high head, large flow rate (mixed flow can reach 2000 cubic meters/hour), large pumping depth (can pump up to 60 meters deep), wide transportation distance range, etc. characteristics The solid-liquid mixture concentration can reach 60%. Suitable for extracting various types of yellow sand, mineral sand, industrial and mining enterprises, used for transporting tailings slurry, tailings, slurry, slag, fly ash and other highly abrasive media.

　　Alloy casting sand pump manufacturer, high-power stirring sand pump model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud pump

　　100 rated flow rate (m3/h)

　　28- Rated head (m)

　　15- Rated power of motor (Kw)

　　CSQX: Stainless steel submersible sand pump CSQL: Self cooling submersible sand pump

　　CSQR: High temperature resistant submersible mud pump CSQRX: High temperature resistant stainless steel submersible mud pump

　　Usage conditions:

　　1. The power supply is 50Hz or 60Hz/230V/380V/415V/440V/660V/1440V. It is a three-phase AC power supply. The capacity of the distribution transformer is 2-3 times the rated capacity of the motor.

　　2. The temperature of the medium shall not exceed 60 ° C, and the type R shall not exceed 140 ° C. It does not contain flammable or explosive gases.

　　3. The weight concentration of solid particles in the medium is 45% ash and 60% slag.

　　4. Diving depth for passengers: not exceeding 50 meters, the small diving depth depends on the diving motor.

　　The working position of the unit in the medium is vertical, with the upper part suspended and positioned.

　　Structural characteristics of high-power stirring sand pump from alloy casting sand pump manufacturer:

　　1. The whole machine is a dry bottom pump type. The motor adopts oil chamber sealing method and built-in mechanical seal, which can effectively prevent high-pressure water and impurities from entering the motor cavity.

　　In addition to the main impeller, there is also a stirring impeller that can stir the sludge deposited at the bottom of the water into turbulence and extract it.

　　3. The overflow components such as impellers and mixing impellers are made of high hardness and high chromium cast steel, which is wear-resistant, corrosive, and sandy, and can pass through large solid particles.

　　4. When the motor is immersed in water, it is not limited by the suction range, resulting in a high absorption rate of slag and more thorough drainage.

　　5. The stirring impeller directly contacts the sedimentary surface, and the concentration is controlled by the diving depth. When the medium density is high, auxiliary equipment can be installed to increase the medium concentration.

　　Application scope:

　　1. Drainage, rivers, lakes, reservoirs, and ports.

　　2. Sedimentation in rivers, lakes, and oceans.

　　3. Reclamation of land in coastal areas.

　　4. Sludge and mud discharge during the project construction process.

　　5. Remove sediment from municipal pipelines and rainwater pumping stations.

　　6. Cleaning of sludge, silt, and gravel from sewage treatment plants, steel plants, thermal power plants, and other sedimentation tanks.

　　7. High temperature waste residue, boiler high-temperature slurry, heat-resistant scale, and metallurgical high-temperature slurry pump discharge.

　　8. Extract ore powder, mortar, etc. from diamond sand, tailings, quartz sand, rare earth ores.

　　Alloy casting sand pump manufacturer, high-power stirring sand pump technical parameters:

　　Power: 3KW-132KW Flow: 10-2200m3/h

　　Head: 5-60m Speed: 1440r/min, 980r/min

　　Caliber: 50mm-300mm Temperature: -15 ℃ -+140 ℃

　　Particle size: within 5cm Material: wear-resistant alloy

　　Manufacturer of wear-resistant sand pumps. One year warranty, if not satisfied, return directly. High chromium alloy wear-resistant sand pump model online consultation, we have the strength to have good prices! Wear resistant sand pump prices, compare and choose! Not just giving you a choice of price! Each high wear-resistant pump produced ensures that the steel saw does not move, and the pump can operate continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer.

　　Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

　　This quotation is for reference only. The price varies depending on the power size. Please call us for more information!

AfterSalesService :

• Alloy casting sand pump manufacturer