Mixing sand pump, ship pump, sand pump, 8-inch high flow sand pump

Description :

　　The 8-inch high flow sand pump is a single-stage single suction centrifugal pump, which is divided into multiple main specification series according to the outlet diameter, such as 300mm, 250mm, 200mm, 150mm, 100mm, etc. This product has good wear resistance, a wide range of models, and is easy to choose from. Can meet the requirements of high flow and high head environments. Our product comes with a one-year warranty, packed in wooden crates, and provides customers with accessories at a low price. Our pumps are also exported to Indonesia, Vietnam, Southeast Asia, Africa, and other places year-round; Please check the manufacturer and do not be mistaken as unnecessary. economic loss.

　　Mixing sand pump, ship pump, sand pump, 8-inch high flow sand pump, technical parameters:

　　Power: 3KW-132KW Flow: 10-2200m3/h

　　Head: 5-60m Speed: 1440r/min, 980r/min

　　Caliber: 50mm-300mm Temperature: -15 ℃ -+140 ℃

　　Particle: Wear resistant alloy within 5cm

　　Mixing sand pump, ship pump, sand pump, 8-inch high flow sand pump, application range:

　　1. Smelter: Transport various smelting waste residues and tailings slurry.

　　2. Mines, beneficiation and crushing plants: tailings transportation, various tailings, slurry, coal slurry, slag, slag treatment, etc.

　　3. Coal preparation plant: transportation and discharge of coal slurry, coal slurry and slag after coal washing.

　　4. Ceramic and glass factories: transportation of porcelain clay and crushed stone, transportation and discharge of glass slag, etc.

　　5. Steel factory: transportation of sediment, iron slag, rust, corrosive liquids, etc.

　　6. Water conservancy engineering: dredging of river channels, removal of silt from reservoir dams, pumping of silt from riverbeds, and treatment of sand and gravel at the bottom of hydropower stations.

　　7. Sewage treatment plant: cleaning of oxidation ditch sedimentation tanks, discharge of sludge, discharge of sediment from sedimentation tanks, etc.

　　8. In thermal power plants: the discharge of coal slag, slag or ash generated from coal combustion in sedimentation tanks.

　　9. In the brewery: Clean up the wine residue and impurities in the brewery pool.

　　Model meaning:

　　100CSQ（R）（X）100-28-15（L）

　　100- nominal diameter of pump outlet (mm)

　　CSQ - Wear resistant submersible mud pump

　　100- Rated flow rate (m3/h)

　　28- Rated head [m]

　　15- Rated power of motor (Kw)

　　CSQX: Stainless steel submersible mud pump CSQL: Self cooling submersible cement sand pump

　　CSQR: High temperature resistant submersible cement sand pump CSQRX: High temperature resistant stainless steel submersible cement sand pump

　　Mixing sand pump, ship pump, sand pump, 8-inch high flow sand pump, operating conditions:

　　1. The power supply is 50Hz, 60Hz/230V, 380V, 480V, 660V, 1140V three-phase AC power supply, and the capacity of the distribution transformer is 2-3 times the fixed electrical capacity.

　　The working position in the medium is vertical, and the working state is continuous.

　　3. Diving depth: not exceeding 60 meters, depending on the diving motor.

　　4. The concentration of solid particles in the medium is 45% ash and 60% slag.

　　5. The temperature of ordinary type shall not exceed 60 ℃, and the temperature of R type (high temperature resistant) shall not exceed 140 ℃, and shall not contain flammable and explosive gases.

　　Mixing sand pump, ship pump, sand pump, 8-inch high flow sand pump, structural characteristics:

　　1. The overall equipment is simple, without the need for auxiliary mixing or spraying devices, easy to operate, and reduces the total investment of the unit.

　　2. The flow components such as impellers and mixing impellers are made of high hardness and high chromium cast steel, which is wear-resistant, corrosion-resistant, has strong slag discharge capacity, and can absorb large solid particles.

　　3. The flow channel is wide and smooth, with good anti clogging performance and superior cavitation performance.

　　4. The overcurrent components are made of special materials with good wear and corrosion resistance, and have undergone special treatment.

　　5. The pump adopts a hard alloy mechanical seal for sealing.

　　One year warranty, if not satisfied, return directly. High chromium alloy wear-resistant sand pump model online consultation, we have the strength to have good prices! Wear resistant sand pump prices, compare and choose! Not just giving you a choice of price! Each high wear-resistant pump produced ensures that the steel saw does not move, and the pump can operate continuously for 24 hours.

　　Manufacturer Name: Zibo Ruiyu Pump Industry Co., Ltd

　　Friendly reminder: Recently, many peers have stolen company product images, using low prices to attract customers, using ordinary sand pumps, or directly modifying sewage pumps to deceive consumers (the modified sewage pump sand pump is difficult to distinguish from the appearance, and can pump slightly muddy sewage, but the heavy sediment slurry slag coal slag can only sigh at the ocean).

　　The quality of a pump can be judged from two aspects:

　　1. The weight of the pump. If the pump is light, it indicates poor material quality or a thin pump body (the small sand pump produced by our factory weighs 82 kilograms with a capacity of 3KW).

　　2. A simple method is to use a steel saw blade to see the answer. ）Please identify the manufacturer and do not be deceived, causing unnecessary economic losses. Welcome customers to visit, guide and inspect the factory.

　　The factory is located in China Pump City (Shandong Zibo Boshan)

AfterSalesService :

• Mixing and sand pumping pump
• marine pump