Silver ion sterilizer for efficient sterilization and no secondary pollution. Swimming pool water treatment equipment for drinking water

Description :

  Silver ion sterilizer is a water treatment equipment that uses electrochemical principles to release silver ions for water disinfection and sterilization. It releases trace amounts of silver ions into the water, disrupting the cell walls and enzyme systems of bacteria and viruses, thereby inhibiting their reproduction and achieving inactivation. This device mainly solves the problems of odor, by-products, and corrosiveness caused by traditional chlorine disinfection, and is suitable for direct drinking water, hot water systems, swimming pools, landscape water, and circulating cooling water systems that require high water quality, taste, and safety. Compared to ultraviolet disinfection, silver ions have sustained antibacterial ability, which can effectively prevent secondary pollution in the pipeline network and ensure the safety of end use water.

  The silver ion sterilizer usually uses high-purity silver electrodes as the source of generation, combined with an intelligent control unit to achieve precise regulation of silver ion concentration. The equipment casing is mostly made of 304 or 316L stainless steel material, which has good corrosion resistance and compressive strength, and is suitable for various complex installation environments. The implementation standards refer to the "Safety Evaluation Standards for Drinking Water Transmission and Distribution Equipment and Protective Materials" and relevant industry standards. The typical working voltage is 220V/50Hz, and the silver ion release concentration can be controlled between 0.01-0.1mg/L. The specific value is automatically adjusted according to the treated water volume and water quality conditions. The device is equipped with a built-in flow sensor and residual silver monitoring module to ensure stable and reliable disinfection effect, which meets the strict requirements of the health department for drinking water disinfection facilities.

  When selecting a silver ion sterilizer, it is important to consider the amount of treated water, pipe diameter, and installation space. For home or small office spaces, desktop or small ducted models can be selected; For swimming pools, large cooling towers, or municipal water supply networks, it is necessary to choose high flow industrial grade equipment. If the hardness of the raw water is high, it is recommended to perform pre softening treatment to prevent electrode scaling from affecting the release efficiency. Compared with ozone disinfection, silver ion sterilizers have no risk of toxic gas leakage and are safer to operate; Compared with chlorine based formulations, although the initial investment is slightly higher, long-term operation does not require frequent addition of chemical agents, resulting in lower maintenance costs and no residual hazards. Not suitable for the pre-treatment stage of wastewater containing a large amount of suspended solids or organic matter, it needs to be used in conjunction with a filtration system.

  When installing a silver ion sterilizer, it should be connected in series after the filtration system, before the water storage tank or water point, to ensure smooth water flow through the electrode chamber. Daily maintenance mainly includes regular checks on the consumption of silver electrodes, and timely replacement when the electrode thickness decreases to a critical value to ensure the efficiency of silver ion release. It is recommended to clean the scale or impurities attached to the electrode surface every six months by soaking it in a weak acid solution and rinsing it with clean water. Common faults include abnormal current alarm or excess silver in the effluent. In this case, the parameter settings of the control board and the fluctuation of the inlet water quality should be checked. During equipment operation, frequent power outages should be avoided to maintain a stable electric field environment, extend electrode lifespan, and ensure sustained and efficient sterilization performance.

AfterSalesService :