DSM Dingfu Tu-02 resin fluorocarbon topcoat
Category:
building materials/Corrosion resistant and radiation resistant materials/Building anti-corrosion coating
Model:
a bucket
Brand:
DSM Dingfu Tu
Retail Price
10,000,000.00USD
重量
kg
- Product Description
-
Description :
DSM Dingfu Tu-02 resin fluorocarbon topcoat is a two-component self drying coating composed of advanced fluorocarbon resin, special resin, and main film-forming substances. Due to the high electronegativity of the introduced fluorine element and strong carbon fluorine bond energy, fluororesin coatings have particularly superior properties. Weather resistance, heat resistance, low temperature resistance, chemical resistance, and unique non stick and low friction properties. It is a high-end building cover protective coating
Main performance:
This product has excellent acid resistance, alkali resistance, salt resistance, water resistance, stain resistance, oil resistance, full and bright coating, high decorative value, bright color, excellent weather resistance and color retention, long service life and other characteristics. Unless under special circumstances, the anti-corrosion period can last for more than 20 years. It is a high-end building protective coating.
Scope of application:
This product is suitable for decorative and protective coating of outdoor building complexes, including steel structure facilities, bridges, docks, hydraulic valves and components, urban guardrails, highway facilities, oil tanks and storage tanks, urban light rail, municipal facilities, fitness and amusement facilities, color steel and metal plate surfaces, and other building environments.
Construction method:
1. After opening the bucket, thoroughly stir the paint until there is no sediment at the bottom of the bucket, and mix it evenly according to the ratio of paint: curing agent=10:1. After curing for 5-15 minutes, it can be used. The diluent must be a matching special diluent with a dosage of 5-15%. After using the curing agent, it is necessary to immediately cover the bucket to prevent drying or moisture infiltration during curing.
2. It is recommended to use the prepared paint within 3 hours, and remember to pour the unused paint into the original paint bucket.
2. Brushing, air spraying, airless spraying, roller brushing. The applicable period is 4 hours (25C).
AfterSalesService :
Key words:
