NSF certified TS brand 2-point PE food grade direct drinking water pipe, water dispenser, water purifier, dedicated water supply hose

Description :

  This NSF certified 2-point TS brand PE water pipe is a food grade direct drinking water delivery pipeline designed specifically for water dispensers and water purifiers. It mainly solves the problem of secondary pollution that may exist in traditional ordinary water pipes, ensuring the safety of water quality from the water purification equipment to the outlet. This PE water pipe is suitable for connecting water purification systems in home kitchens, office tea rooms, and commercial catering venues. Typical operating conditions include transporting pure water and mineral water in environments ranging from room temperature to medium low temperature. As a 1/4 inch water supply hose, its inner wall is smooth and not prone to scaling, effectively ensuring the hygiene standards of drinking water, and is a key component in building a healthy drinking water terminal.

  In terms of specifications and materials, the TS brand PE water pipe is made of high-quality polyethylene (PE) raw material, which meets the requirements of food grade contact materials and has passed strict NSF international certification to ensure non-toxic and odorless properties. The diameter standard is 2 minutes (i.e. 1/4 inch, outer diameter of about 6.35mm), with uniform wall thickness, good flexibility and compressive strength. The implementation standard refers to the safety evaluation standards for drinking water transmission and distribution equipment and protective materials in the country, with a tolerance pressure usually between 0.8-1.2MPa, suitable for the outlet pressure of most household and commercial water purifiers. The color of the pipe is white or semi transparent, without impurities or black spots, resistant to acid and alkali corrosion, and will not age or break after long-term use, ensuring the stable operation of the water supply system.

  When selecting, it is necessary to clearly distinguish the differences between these 2-point PE water pipes and other specifications or materials. It is designed for small flow, low-pressure water purification end connections and is not suitable for high-temperature hot water transportation or main tap water inlet pipelines (usually requiring PPR/PVC pipes of 4 or more). If your water purification equipment interface is a 1/4 inch quick connect connector, this TS brand PE water pipe is an ideal matching choice. Compared to silicone tubing, PE tubing has moderate hardness, more stable insertion and removal, and lower cost; Compared to PVC pipes, PE pipes are softer and easier to bend, making them suitable for wiring in narrow spaces. Please confirm the interface size of the equipment before procurement to avoid water leakage or installation difficulties caused by mismatched diameters, and ensure compatibility with mainstream brand water purifier filters and faucets on the market.

  In terms of installation and maintenance, it is recommended to use a dedicated 2-point PE pipe cutter for cutting when using this PE water pipe, ensuring that the cut is flat and vertical, so as to seal tightly when inserting the quick connector and prevent leakage. In daily use, avoid squeezing heavy objects or scratching the pipe wall with sharp objects. Although PE material has certain wear resistance, physical damage may still lead to the risk of pipe bursting. It is recommended to check the condition of the pipeline every 1-2 years. If the pipe wall turns yellow, hardened, or has obvious creases, it should be replaced with a new TS brand PE water pipe in a timely manner to maintain the best water quality delivery effect. Regularly observe whether there are water stains seeping out from the joint, tighten or replace the joint accessories in a timely manner, and ensure a continuous and safe direct drinking water supply experience.

AfterSalesService :