10 inch universal water purifier filter cartridge PP cotton activated carbon sintered carbon rod multi-stage filtration

Description :

  The 10 inch universal water purifier filter element is a core consumable in household and commercial water purification systems, mainly used to remove sediment, rust, residual chlorine, discoloration, odor, and some organic pollutants from tap water. This category is usually used as a pre - or intermediate filtration unit to solve problems such as turbid water quality and poor taste, and is suitable for water purification equipment with standard 10 inch filter bottles. Through physical interception and adsorption, it effectively protects the back-end RO membrane or ultrafiltration membrane, extends the service life of the whole machine, and is the basic component to ensure the safety of terminal drinking water.

  This series of filter cartridges includes various materials such as PP cotton, coconut shell granular activated carbon, compressed activated carbon, and sintered carbon rods. The standard size is usually 60-65mm in outer diameter, 250mm (10 inches) in length, and the interface is mostly flat or with a rubber ring. The filtration accuracy of PP cotton is commonly 1 micron or 5 microns; Activated carbon generally has an iodine value of ≥ 900mg/g, a large specific surface area, and strong adsorption capacity. The product complies with food grade contact material standards, and some high-end models have passed NSF certification. Sintered carbon rods have uniform density and are less prone to powder loss. Compared to granular carbon, they are more effective in preventing water flow short circuits and ensuring stable and reliable filtration effects.

  When selecting, it is necessary to clarify whether the specifications of the water purifier filter bottle are standard 10 inches and distinguish the required filtration stages. PP cotton is suitable for first layer coarse filtration to intercept large particle impurities; Granular activated carbon is suitable for the second layer, with a focus on removing residual chlorine and odors; Compressed carbon or sintered carbon rods have both filtration and adsorption functions, making them suitable for scenarios with high requirements for effluent accuracy. If the quality of the raw water is poor, it is recommended to increase the frequency of PP cotton replacement; If the main improvement is in taste, high-quality coconut shell activated carbon should be prioritized. Pay attention to distinguishing the flux size, ensure it matches the water machine, and avoid excessive pressure loss affecting the water outlet speed.

  Before installation, the surface of the filter element should be cleaned of floating dust. When installing the filter bottle, pay attention to the position of the sealing ring to prevent water leakage. It is recommended to replace PP cotton every 3-6 months and activated carbon filter every 6-12 months, depending on local water quality and usage. When the water output significantly decreases or the taste deteriorates, it should be checked and replaced in a timely manner. After long-term disuse, when reusing, rinse with water for 5-10 minutes to remove any bacteria or residual carbon powder that may have grown in the filter element, ensuring water hygiene. Regular maintenance can maintain water purification efficiency and avoid secondary pollution.

AfterSalesService :