Shiyan Bridge Drain Pipe-420 Drain Pipe Price

Description :

　　Shiyan Bridge Drain Pipe-420 Drain PipePrice The commonly used specification for bridge cast iron drain pipes is circular, suitable for longitudinal drainage with waterproof layer paving structures. The inner diameter of the drainage pipe is generally 0.10-0.15m, and the lower end of the pipe should extend at least 0.15-0.20m below the bottom of the roadway slab to prevent moisture from seeping into the surface of the main beam ribs. After placing an order for a conventional circular bridge cast iron drain pipe, it will be shipped on the same day. The role of bridge cast iron drainage pipes in bridge deck drainage systems is irreplaceable. Hengshui Xurui has been producing various specifications and models of circular and rectangular cast iron drainage pipes for many years. The commonly used ones are a total height of 420mm, a large mouth outer diameter of 215mm, a small mouth inner diameter of 100mm, and wall thicknesses of 5.5mm, 7mm, 8mm, and 10mm. The rectangular bridge cast iron drain pipe is pre embedded with reinforced concrete and the drain pipe during the construction of the bridge deck, and holes can also be reserved. It is suitable for paving structures using waterproof concrete without a waterproof layer

　　China's high-speed railway has summarized rich experience in the anti freezing design of high-risk tunnels, roads, and bridges in cold regions, which has good reference significance for future railway construction in cold regions. The price of the guardrail bracket is yuan per piece. Pre embedded base plate * cm. The general customer drawing is ZG cast steel guardrail bracket, which is almost the same size as the centimeter high cast iron guardrail bracket. It can be said that the centimeter high guardrail bracket is a derivative substitute for ZG guardrail bracket, with a better cost-effectiveness than ZG. Steel track switches are covered with ice and snow, and when the snow melts, it is easy to freeze the switch, causing the switch rail and steel rail to not fit tightly. The railway department has improved the snow melting device for turnouts and installed electric snow melting plates at the switch tips. After continuous snowfall, electric heating and automatic temperature sensing and control technology are used to walk for an hour every day in near minus Celsius weather outdoors, in order to identify rail scratches that are less than millimeters through instruments. Once the raw materials for bridge guardrail supports are usually cast iron, cast iron, stainless steel, ensuring bridge quality, cast iron guardrail supports with elastic joint bridge guardrail supports, the jumping steps of joint elasticity can reduce and prevent disorderly competition in the market. Due to the long term, it is full of, although a bit tedious. Common specifications include 125 × 400mm, 160 × 447mm, 125 × 300mm, 125 × 510mm, 125 × 600mm, 160 × 585mm, and so on. For our factory, customers only need to provide information such as height, thickness, diameter, shape, angle, etc. to ship on the same day. However, those bridge drain pipes with special specifications and sizes must be strictly customized according to the drawings. The cast iron drain pipe has been specially processed, and its quality is excellent. It has many advantages, such as non-toxic and tasteless, anti-corrosion, aging resistance, weather resistance, long service life, maintenance free, etc.

AfterSalesService :

• Shiyan Bridge Drain Pipe