Dingxi manufacturer provides observation standard price including tax

Description :

　　Dingxi manufacturers' supply of observation benchmark prices, including taxes, has entered December, and the steel market has seen a slight increase, especially with the fluctuation and continued rise of futures snails. However, steel traders generally hold a cautious attitude towards the future market, and coupled with downstream demand and procurement, the weak supply and demand pattern is difficult to change in the short term.

　　Market trend of finished products

　　On the 3rd, the North China tropical zone was dominated by strip steel. In terms of the market, the dominant market in the morning session was Tangshan narrowband mainstream, which remained stable. The overall transaction volume was generally weak, and only a few were able to clear Nissan. Today's statistics show that 5 narrowband small factories in Tangshan shipped a total of 7700 tons, an increase of 1400 tons from yesterday. The snail rose sharply in the early morning period, with insufficient momentum to pull up, and maintained a 10-20 adjustment compared to this morning. Due to narrow fluctuations, there is not much room for operation, and many merchants follow the market trend and mainly ship at high prices. Tangshan has once again activated its response to heavy pollution weather warnings, with weak supply and demand for strip steel, making it difficult to see significant changes. Considering that the steel billet is stable and the material is clear or firm, it should be sorted.

　　【 Hot Rolls 】 The mainstream hot rolls in China have stable fluctuations with a range of 10-40, indicating a strong correlation. However, the mentality of merchants is unstable, and their willingness to raise prices is average. The market trading atmosphere is relatively light, and overall transactions have slowed down compared to yesterday. It is expected that the overall trend of hot rolls in China will remain stable in the short term.

　　Today, there are some stable adjustments among the main players of the China National Equities Exchange and Quotations (NEEQ), with a range of around 10-30. The market is relatively strong and the sentiment is still good, but the actual transactions are still cautious. The level of merchant resources is low, and the overall operational enthusiasm is not high. It is expected that the NEEQ prices will remain stable and moderate in the near future.

　　According to Fubao's statistics, on the 3rd, the mainstream market price of snail products in China remained stable with a slightly strong adjustment, and some fell back during trading. Among the 52 sample cities, there are 17 cities with rising prices, accounting for 32.69%, with an increase of 10-30%, 30 cities with stable prices, accounting for 57.69%, and 5 cities with falling prices, accounting for 9.62%, with a decrease of 20%. As of press time, the steel billet is more stable than yesterday and is now reported at 4290 yuan/ton. The futures market fluctuated strongly and ultimately closed up 88%. From the perspective of the finished product market, the news of production restrictions has boosted the market, but overall demand in the market is weak, market transactions are generally weak, and there are shortages of specifications and low inventory in some regions. There has been a significant adjustment in specification price increases, and traders are cautious. However, steel mills still have the willingness to raise prices. Taking all factors into consideration, the price of materials is stable with a slight increase. The main influencing factors are as follows: 1. Overall demand is weak, and market transactions are generally weak; 2. The period of snail oscillation is relatively strong, boosting the market; 3. Traders are cautious in their mindset. 4. Some regions have low inventory levels and a shortage of specifications; 5. Steel mills have a strong willingness to raise prices. When the observation results exceed the tolerance limit, re measurement should be carried out according to the following regulations: 1. When the difference between 2C or each measurement loop exceeds the tolerance limit, the over limit direction should be re measured and the zero direction should be measured together. 2. Zero deviation or 2C in the zero direction If the mutual difference exceeds, the measurement should be remeasured. 3. In the direction observation method, when the number of remeasured directions exceeds one-third of the total number of measured directions, the measurement should be remeasured. 4. The direction observation method should be used on the same side of the station. When the number of remeasured directions in the basic measurement exceeds one-third of the total number of measured directions, all directions of the station should be remeasured using the full combination angle measurement method. When the number of remeasured directions exceeds one-third of the total number of basic measurements, the station should be remeasured. 5. The results of the basic measurement and the remeasurement should be recorded in the notebook, and the results of the remeasurement and the basic side measurement should not be taken as the median. Only one symbol deviation result is taken for each measurement cycle. 6. In the full combination angle measurement method, when the difference between the direct angle and the indirect angle exceeds one-third of the total basic measurement cycles, a single angle can be remeasured. 7. When the closure error of a triangle exceeds the limit and needs to be retested, careful analysis should be conducted and relevant measurement stations should be selected for retesting.

AfterSalesService :

• Dingxi manufacturer supplies observation markers