Baotou roadbed settlement plate manufacturer Shuntian settlement plate price settlement detection pile

Description :

　　Baotou roadbed settlement plate manufacturer Shuntian settlement plate price settlement detection pile

　　The burial position of the settlement plate should be determined according to the design measurement. A 10cm sand cushion layer can be placed at the burial position to level it. During burial, ensure that the measuring rod is perpendicular to the ground. ② After placing the settlement plate, backfill a certain thickness of cushion layer, and then cover it with a protective sleeve. The protective sleeve should be slightly lower than the settlement plate measuring rod, and the upper opening should be covered to seal the pipe mouth. Corresponding filling materials should be filled around it to stabilize the sleeve and complete the burial work of the settlement plate. ③ The elevation reading of the top of the settlement plate measuring rod buried in place is taken as the initial reading. As the roadbed filling construction gradually increases, the settlement plate measuring rod and protective sleeve are raised. The appropriate height for each extension is 0.5m, and the change in the top elevation of the measuring rod before and after extension determines the amount of extension. The metal measuring rod is connected with an inner joint, and the protective sleeve is connected with an outer joint of PVC pipe.In the past two months, steel prices have fluctuated upwards. For the upcoming off-season of steel demand, where will steel prices go? Reporters interviewed some steel traders in Beijing and learned that they generally believe that steel prices will not experience significant fluctuations in the next two months. Analyst Ma Li from Lange Steel Network stated that there is a high possibility of steel prices falling back from high levels in the next two months, but the magnitude is relatively limited. Recently, the Inter Ministerial Joint Conference on Resolving Excess Capacity and Developing Difficulties in the Steel and Coal Industry scheduled to organize 8 inspection teams to conduct special inspections in 21 provinces (regions, cities) from May 22 to June 15, 2018 to resolve excess capacity and prevent the resurgence of "strip steel" in the steel industry. Recently, environmental policies in the domestic steel market have been flying around, which may have an impact on steel production in the next two months from a long-term perspective.

　　According to market monitoring data from Lange Steel Network, the comprehensive index of steel prices on May 21, 2018 was 159.8, an increase of 7% from the low point on March 27; The growth rate of the long timber index is about 10%, showing a fluctuating upward trend. Observation data should be promptly organized to calculate the settlement amount, settlement difference, average settlement amount and settlement velocity of the observation point in this cycle. If there is an abnormal change in the amount of change, the client should be immediately informed of the observation point to provide a basis for taking preventive measures. Firstly, the situation at the level is not good. In the context of seasonal demand, the current market is difficult to form a relatively unified bullish view in the later stage, and it is difficult to form a systematic purchasing demand.

　　In addition, due to the current steel price level, most private enterprises do not suffer significant losses, so the motivation for maintenance and production reduction is still insufficient. High production will continue in the later stage, and the sales and inventory pressure of steel traders and steel mills will only increase. At the same time, appropriate observations should be made, and observations of different periods should follow the principle of "five determinations". The so-called "five determinations" refer to the benchmark points, base points, and settlement observation points on the observed object that are commonly used as the basis for settlement observation; The instruments and equipment used should be:; However, some analysts believe that in recent times, there have been signs of "reducing production without reducing output" in the coal industry in some provinces. For example, some coal mines may appear to have a production capacity of millions of tons, but their actual production capacity is not the approved capacity. Some industry insiders even claim that some coal companies' contraction of mining is just a temporary measure, and if the market turns around, they still have plans to resume production. Observers need to; The conditions for observation should be basically consistent; Observation route, mirror position, program, and need to be fixed. The above measures can objectively ensure the subjective uncertainty of observation errors as much as possible, so that the measured results have a unified tendency; Can ensure the comparability between each retest result and the observation result, making the observed settlement more accurate

AfterSalesService :

• Baotou roadbed settlement plate