Real time quotation for wind and power observation points of Zhangzhou stainless steel observation marker U-shaped settlement observation marker
Category:
metallurgy/Stainless steel material/Stainless steel bars
Model:
Brand:
Cangzhou Shuntian
grade:
Observation standard
cross-sectional shape:
round bar
surface treatment:
glossy surface
Processing Technology:
Forging
tensile strength:
370MPa～480MPa
Processing Service:
deep processing
execution standard:
National Standard
quality grade:
A-level
Processing & Customization:
yes
Is it imported:
No
weight:
one
Scope of application:
rail transit
delivery service:
Can be delivered to the factory
Type of goods sales:
spot
Item Number:
twenty thousand one hundred and twenty
warehouse address:
Cangzhou, Hebei
warehouse phone:
fifteen billion one hundred and three million three hundred and seventy-two thousand six hundred and sixty-seven
manufacturer:
Cangzhou Shuntian Steel Pipe Co., Ltd
Retail Price
12.00USD
重量
kg
- Product Description
-
grade Observation standard
cross-sectional shape round bar
surface treatment glossy surface
Processing Technology Forging
tensile strength 370MPa～480MPa
Processing Service deep processing
execution standard National Standard
quality grade A-level
Processing & Customization yes
Is it imported No
weight one
Scope of application rail transit
delivery service Can be delivered to the factory
Type of goods sales spot
Item Number twenty thousand one hundred and twenty
warehouse address Cangzhou, Hebei
warehouse phone fifteen billion one hundred and three million three hundred and seventy-two thousand six hundred and sixty-seven
manufacturer Cangzhou Shuntian Steel Pipe Co., Ltd
Description :
Real time quotation for wind and power observation points of Zhangzhou stainless steel observation marker U-shaped settlement observation marker
1: We need to take the opposite direction of the known point as the forward direction, place a level between the measuring station and the known point, pay attention to keeping the distance as equal as possible, and then roughly level the level.
2: Rear view leveling ruler, precision leveling, reading, record in the table (note: both points need to be operated as above), to facilitate the calculation of the height difference of the station.
3: Repeatedly adjust the height of the instrument, repeat the second operation, and the height difference between the two times should not exceed 5mm.
4: Start the second station and repeat all the above operations.
5: Calculate the closure error of the leveling line based on the elevation of known points and the height difference of each measuring station. (Note: Check if the closure error exceeds the limit)
Notes:
1: We need to clarify the data of each station and avoid confusion that may lead to errors.
2: The level ruler must be set on the benchmark and cannot be directly placed on the ground.
3: Each station needs to adjust the height measurement of the instrument at least twice.
4: When leveling, first close the tripod and align their lengths, then place it on the flat bottom. The telescope should be at the same height as the line of sight, and observe the circular level to ensure that the bubble is in the center.
5: When leveling, use a micro tilt spiral to observe the outside to inside of the long level, and adjust it continuously when observing long bubbles.
6: To eliminate parallax, it is necessary to strictly align the level bubbles before taking readings.
AfterSalesService :
Key words:- Zhangzhou Stainless Steel Observation Standard
More Products
