Yunfu observation marker 20 * 120 stainless steel observation marker inventory is sufficient

Description :

　　More than half of January has already passed, and downstream commerce in the market is gradually leaving the market. The current price situation has not met the expectations of winter storage, and the off-season combined with the lack of active pre holiday stocking and other factors. What will be the trend of the two weeks before the holiday? Why don't we take a look at the current situation first!

　　Inventory situation in the steel billet market

　　On the 18th, the total inventory of steel billets in Tangshan was 144500 tons, an increase of 3300 tons compared to yesterday. Among them, Haiyi Hongrun received 0.11 tons in storage and 0.04 tons out of stock yesterday, with a current inventory of 94700 tons; Xiangyu Zhengfeng received 0.18 million tons of inventory and 0 tons of inventory yesterday, with a current inventory of 29700 tons; Guochan Zhenxiang received 0.09 in storage and 0.01 out of stock yesterday, with a current inventory of 20100 tons. In terms of the market, downstream steel companies purchase billets according to demand and have low enthusiasm for replenishing inventory, resulting in weak direct sales of steel billets today. The black colored snail market is fluctuating and adjusting, and traders are becoming more cautious.

　　Cost comparison

　　145 narrowband 4650 stable, with a billet price difference of about 290; 5 # angle steel is stable at 4790, and the price difference between corner blanks is about 430; 14 # channel steel 4800 fell 30%, and the price difference of groove blank was about 440; 20 # I-beam 4860 stable, with a billet price difference of about 500; 25 # threaded steel 4620 is stable, with a price difference of about 260 for screw blanks.

　　Price changes of some varieties in January

　　Since January, prices have generally shown a strong trend, with significant increases in strip and profile prices. Strip prices have even reached a price difference of 110 yuan, while building materials are experiencing mixed ups and downs. Against the backdrop of off-season market conditions and production restrictions, manufacturers' mentality is still relatively firm, but it also indirectly reflects the high winter storage prices and limited operability.

　　Steel market start-up data

　　According to Fubao statistics, as of January 18th, out of 17 strip steel production lines in 15 145 strip steel mills in Tangshan, 12 were under maintenance, affecting production of 24400 tons. 5 strip steel lines were operating normally, with a start-up rate of 29.41% and a capacity utilization rate of 32.03%.

　　According to Fubao statistics, as of January 18th, out of 27 strip steel production lines in Tangshan's 17 strip steel mills with 242 or more, 8 strip steel lines were under maintenance this week, affecting production of 43000 tons. 19 strip steel lines were in operation, with a start-up rate of 70.37% and a capacity utilization rate of 65.57%. The narrowband operation rate is not high, and the local narrowband operation is also sluggish due to the influence of Tianjin. The narrowband supply around the Beijing Tianjin Hebei region relies on Tangshan, so the market supply is less than demand, and the low-level demand is still acceptable.

　　market dynamics

　　Steel market delisted: Futures contract 2205 closed at 4599, up 12. The nationwide decline in finished products has slowed down, with the average price of most varieties dropping by 10-20, narrowing the decline compared to yesterday. With the rebound of the snail market, some varieties have also experienced price increases, but high-level transactions are weak, and the terminal market is difficult to improve. Most of them have taken early holidays, with sporadic demand mainly for essential needs and little speculative demand. Business operations mainly focus on closing accounts, and some businesses maintain shipment operations to reduce inventory risks. The overall trading atmosphere is sluggish. Suggest merchants to operate as needed. Periodic snail oscillation, supporting 4530-4550, pressure 4600-4620.

　　Editor's View on the Market (Personal Opinion Only)

　　Setting aside market fundamentals, from the Central Economic Conference in December, it can be seen that a proactive fiscal policy and a prudent monetary policy will continue to be implemented in 2022, which will provide a bottom line for the demand in the steel market. However, due to the ongoing downward pressure on the economy and the impact of the conference, the fundamental imbalance between supply and demand in the steel market has not fundamentally improved. Overall, the cooling demand does not support a rise in steel prices, but the accumulation rate of inventory this year is slower than in previous years, especially with less inventory pressure on steel mills and a strong willingness to raise prices. In the short term, steel prices may remain volatile at a high level, with limited room for decline.

　　The working base point (hereinafter referred to as the base point) is the benchmark point for settlement observation, which should be established according to the requirements of the settlement measurement plan and network layout principles of the project. The settlement measurement plan should be formulated based on the layout characteristics of the project and the environmental conditions on site. Based on work experience, it is generally recommended to set up three base points around high-rise buildings, with a distance of 50m to 100m from the building. The base point can utilize existing and stable buried stone points and wall base leveling points, or set wall base leveling points on buildings with stable foundations and long construction time in the area. If the above conditions are not met in the area, the base point can be buried in a place with good concealment, good visibility, and safety according to the corresponding requirements. The base points set up are strictly prohibited from use until their stability is determined. Therefore, the height difference between the base points should be measured every time to determine whether they are relatively stable, and the base points should be regularly measured in conjunction with high-level benchmarks far away from the building to verify their own stability.

　　Settlement observation points should be comprehensively considered based on factors such as the shape, structure, geological conditions, and pile shape of the building, and should be located at the most sensitive location to reflect changes in building settlement. It is generally installed at the corners of buildings, in locations with significant differential settlement, in sections with significantly different geological conditions, and on both sides of settlement cracks. When burying, pay attention to the reliable connection between the observation point and the building, so that the changes in the observation point can truly reflect the changes in the building. And based on the floor plan design drawings of the building, draw a settlement observation point layout diagram to determine the location of the settlement observation points. A fixed observation route should be established between the working point and the settlement observation point, and marker posts should be made at the instrument installation station and transfer point to ensure that each observation follows a unified route.

AfterSalesService :

• Cloud floating observation marker