Suihua settlement plate quotation today, roadbed settlement plate quotation, telephone, railway construction inspection, settlement plate quotation

Description :

　　Suihua settlement plate quotation today, roadbed settlement plate quotation, telephone, railway construction inspection, settlement plate quotation

　　Continuously fighting the battle against black and odorous water bodies in cities. Promote full coverage of urban sewage pipe networks, eliminate blank areas in sewage collection pipe networks as soon as possible, and focus on implementing projects such as mixed and misconnected transformation of urban sewage pipe networks, rainwater and sewage diversion transformation, pipe network renewal, damaged repair and transformation, and dredging of silted pipelines. For sewage treatment plants with obvious abnormal inflow conditions, carry out systematic rectification of the district pipeline network. Adapt measures to local conditions to carry out endogenous pollution control and ecological restoration of water bodies, and enhance the self purification function of rivers and lakes. Fully leverage the role of river and lake chief systems, consolidate the effectiveness of black and odorous water treatment in prefecture level cities, and establish a long-term mechanism to prevent the return of black and odorous water. Fully launch the rectification of black and odorous water bodies in county-level cities, and continue to promote the improvement and efficiency of urban sewage treatment. By the end of June 2022, county-level cities will complete the investigation of black and odorous water bodies in built-up areas and develop remediation plans, and uniformly publish the list of black and odorous water bodies and the deadline for compliance. By 2025, the direct discharge of domestic sewage in urban built-up areas will be basically eliminated, and black and odorous water bodies will be basically eliminated in county-level urban built-up areas.

　　Construction and usage principle of settlement plate. Composed of steel plate, measuring rod, and protective sleeve. The size of the base plate can be customized according to customer requirements. The measuring rod and the base plate are fixed in a vertical position, and the protective sleeve is made of steel pipe sleeve. The sleeve size is suitable to cover the measuring rod and allow the ruler to enter the measuring head. As the filling height increases, the measuring rod and sleeve are also correspondingly raised, with each section not exceeding 55cm in length. After raising, the top surface of the measuring rod should be slightly higher than the upper opening of the sleeve. When not measuring, seal the upper opening of the casing with a cap to prevent the filler from falling into the pipe and affecting the free sinking of the measuring rod.

　　Before installation, the roadbed surface must be compacted, and the installation position must be measured. Once the position is fixed, the bottom elevation of the slab should be measured immediately, and this value should be recorded as the initial value.

　　After filling the height beyond 20cm of the observation rod mouth, compact the entire section, and then extend the measuring rod and protective sleeve of the settlement plate. The extension method can be threaded connection or welding connection (measuring rod welding, protective sleeve connection with adhesive tape). After connection, immediately measure the elevation and calculate the actual connection length.

　　(1) Dig a soil pit of about 500, 500, and 500mm at the burial site, and level and compact the pit with 30-50mm thick yellow sand.

　　(2) Place the settlement plate flat in the pit, fill the surrounding area with yellow sand and calibrate the level with a level, and then backfill the soil to level and compact it.

　　(3) When filling, the filling should be compacted around the settlement plate first to protect the settlement. The protective sleeve should be buried 30cm away from the bottom plate.

　　(4) After the previous layer of filling material is compacted, excavate the filling material to the protective sleeve at the pre embedded position, open the pipe plug to measure the elevation of the pipe head, and the difference between the two elevations is the settlement between observations. Then connect the previous section of connecting pipe and protective sleeve, measure the elevation of the pipe head, install the pipe plug, backfill and compact, and so on. The height of the pipe head with a good pipe plug should be 3-5cm lower than the formed filling surface.

　　Five Where can I buy settlement plates? The main production areas of settling plates are in Cangzhou, Hebei and Tianjin. So when you purchase settlement plates, it is recommended to look at the merchants in these two places, as both the quality and performance are highly guaranteed.

AfterSalesService :

• Suihua sedimentation plate