420 type oil-water residue three-phase separator for oil extraction and separation equipment of swill garbage and swill oil purification separator

Description :

　　420 type oil-water residue three-phase separator for oil extraction and separation equipment of swill garbage and swill oil purification separator

　　This equipment, abbreviated as the horizontal oil-water slag three-phase separator, is a device that relies on its own rotating main bearing (a combination of spiral and rotary drum) to rotate at high speed, forming an acceleration several thousand times higher than the gravitational acceleration inside the main bearing, causing the substances to be separated to layer due to the difference in specific gravity between light phase liquid, heavy phase liquid, and solid phase; The solid phase settles onto the inner wall of the drum, forming a solid ring layer, while two liquid phases with different densities form concentric cylinders, with the lighter liquid phase in the inner layer and the heavier liquid phase in the outer layer. The thickness of the different liquid ring layers can be adjusted through a uniquely designed adjustable overflow plate; Then, through the differential gearbox of the equipment, relative motion is generated between the drum and the screw in the rotating main bearing, so that the solid phase deposited on the drum wall is transported by the screw conveyor to the small end of the drum, and is further squeezed in both directions at the cone end of the drum to improve the solid content of the sediment. Finally, it is discharged from the automated separator outside the equipment at the slag outlet at the small end of the drum. As shown in the figure

　　The 420 type oil-water residue three-phase separator for extracting oil from swill garbage has the following structural and performance characteristics:

　　(1) The whole machine adopts an integrated structural design, which is compact in structure, occupies a small area, and is easy to install, operate, and maintain;

　　(2) The machine adopts a fully enclosed structure, which can ensure that solid phase, liquid phase, and odor will not overflow from the inside of the machine, and the operating environment is good.

　　(3) Adopting dual motors - frequency converter drive, the centrifuge speed and differential speed can be infinitely adjustable during operation;

　　(4) We have adopted proprietary energy-saving technology - the auxiliary motor energy recovery system (energy feedback device), which can save 20% to 30% of electricity during the operation of the centrifuge.

　　(5) The slag outlet, spiral feed inlet, and spiral blade scraping parts of the rotary drum are all equipped with replaceable hard alloy sleeves, which extend the service life of the components.

　　(6) In the settling zone inside the drum, the spiral blades adopt strip shaped blades to reduce the disturbance of the spiral on the separation liquid and ensure the separation effect.

　　Structure diagram:

AfterSalesService :

• Oil extraction and separation equipment for swill waste