Lishui Three phase Centrifuge Ruichen Environmental Protection Oil Water Slag Three phase Centrifuge

Description :

　　Lishui Three phase Centrifuge Ruichen Environmental Protection Oil Water Slag Three phase Centrifuge

　　The full name of this model is: Three phase horizontal spiral discharge settling centrifuge. The early production was a two-phase horizontal spiral centrifuge, also known as a solid-liquid separation centrifuge. The two-phase horizontal spiral centrifuge is further divided into solid-liquid separation, liquid-liquid separation, solid-phase concentration, particle wet classification, and sealed explosion-proof. Different mechanisms have different processing requirements for the centrifuge, different uses, and design parameters have been adjusted accordingly. For example, the centrifuge used for sludge dewatering is not suitable for liquid-liquid separation, and the centrifuge used for dye grading is not suitable for separating flammable and explosive materials. Therefore, the selection of two-phase horizontal screw centrifuge is very important and must be finalized according to specific production process requirements. In the later stage, the three-phase horizontal screw centrifuge evolved from the two-phase horizontal screw centrifuge and was developed. Abroad, the oil-water residue three-phase centrifuge is mainly used in the energy industry, especially in industries such as crude oil, waste oil, kitchen waste oil extraction, and petroleum. The principle of the oil-water residue three-phase centrifuge is the separation of solid, liquid, and liquid phases, commonly referred to as oil-water residue three-phase separation. In this way, one oil-water residue three-phase centrifuge can solve the separation of three materials at once.

　　The working principle is shown in the diagram:

　　The Ruichen Environmental Protection Oil Water Slag Three phase Centrifuge in Lishui City is mainly composed of a drive device, differential, screw, drum, hood, machine base, and control system.

　　When the material to be separated is transported by the feed pump to the centrifuge drum, the high-speed rotating drum generates strong centrifugal force to settle solid particles with higher density than the liquid phase onto the inner wall of the drum. Due to the different rotational speeds of the screw and the drum, there is relative motion between the two (i.e., adjustable speed difference), and the solid (slag) with higher density settles onto the drum wall. Two phases of clear liquid with different densities form concentric cylinders, with the lighter liquid phase in the inner layer and the heavier liquid phase in the outer layer. The thickness of different liquid rings can be adjusted by adjusting the liquid plate (i.e. the water content in the oil or the oil content in the water can be adjusted). The slag deposited on the wall of the rotary drum is transported by the screw conveyor to the cone end of the rotary drum, and discharged into the solid material tank from the discharge port. Water and oil are discharged from their respective outlets, and the entire three-phase separation process of oil, water, and slag is automatically fed and discharged.

　　Lishui Three phase Centrifuge Ruichen Environmental Protection Oil Water Slag Three phase Centrifuge is mainly used for clarifying or removing impurities from environmental protection, dairy products, renewable resources, aged oil in oil fields, waste engine oil, and waste oil in catering industries.

AfterSalesService :

• Three phase centrifuge