Oilfield sludge centrifugal concentration dewatering machine Ruichen environmental protection oil sludge solidification dewatering equipment
Category:
Environmental Protection/Sludge treatment machinery/Horizontal spiral centrifuge
Model:
RCWL350
Brand:
Lishui
brand:
Lishui
model:
RCWL350
material:
Stainless Steel 304
Drive Type:
motor drive
Scope of Application:
Sludge dewatering process, centrifugal dewatering process, solid-liquid separation process
classification:
Centrifugal dehydration
Motor power:
15/7.5kw
Separation factor Fr value range:
High speed centrifuge
Place of Origin:
Lishui City, Zhejiang Province
Processing & Customization:
yes
processing capacity:
5-10
Order Number:
RCWL350-3
structural type:
floor-standing
Layout form:
horizontal
Structure and separation requirements:
Decantrifuge machine
degree of automation:
fully automatic
Is it a cross-border source of goods:
No
manufacturer:
Lishui Ruichen Environmental Protection Technology Co., Ltd
Retail Price
215,600.00USD
重量
kg
- Product Description
-
brand Lishui
model RCWL350
material Stainless Steel 304
Drive Type motor drive
Scope of Application Sludge dewatering process, centrifugal dewatering process, solid-liquid separation process
classification Centrifugal dehydration
Motor power 15/7.5kw
Separation factor Fr value range High speed centrifuge
Place of Origin Lishui City, Zhejiang Province
Processing & Customization yes
processing capacity 5-10
Order Number RCWL350-3
structural type floor-standing
Layout form horizontal
Structure and separation requirements Decantrifuge machine
degree of automation fully automatic
Is it a cross-border source of goods No
manufacturer Lishui Ruichen Environmental Protection Technology Co., Ltd
Description :
Oilfield sludge centrifugal concentration dewatering machine Ruichen environmental protection oil sludge solidification dewatering equipment
The sludge centrifugal thickening and dewatering machine is mainly composed of a transfer and a screw conveyor with a hollow shaft. After the sludge is sent into the rotating drum by the hollow shaft, it is immediately thrown into the hub cavity under the centrifugal force generated by high-speed rotation. The proportion of sludge particles is relatively high, resulting in a large centrifugal force that is thrown onto the inner wall of the hub, forming a solid layer; The water density is low, and the centrifugal force is also small, only producing a liquid layer inside the solid layer. The sludge in the solid layer is slowly pushed by the screw conveyor and transported to the cone end of the transfer machine. It is continuously discharged through the outlet around the transfer machine, while the liquid is discharged outside the transfer machine through the overflow of the weir four, and then collected and discharged from the dewatering machine. The most critical component of a sludge centrifugal thickening and dewatering machine is the hub. The larger the diameter of the hub, the greater the dewatering capacity, but the manufacturing and operating costs are quite high and uneconomical. The longer the length of the repost, the higher the solid content of the sludge, but reposting too long will result in a decrease in the cost-effectiveness ratio. During use, the rotational speed of the transfer is an important control parameter. Controlling the rotational speed of the hub to achieve a high solid content and reduce energy consumption is the key to the operation of the centrifugal dewatering machine.
AfterSalesService :
Key words:- Centrifugal thickening and dewatering machine for oilfield sludge
More Products
