Intelligent VOC detection toxic hemp fire and explosion safety cabinet 110 gallon double door with partition

Description :

　　The toxic and anesthetic fireproof and explosion-proof safety cabinet is a high specification hazardous chemical storage equipment designed specifically for medical institutions, laboratories, and chemical enterprises. Its core solution is to address the volatilization, leakage, and fire hazards of highly toxic, anesthetic, and flammable and explosive chemicals during storage at room temperature. This device integrates an intelligent VOC (volatile organic compound) gas detection system and a real-time temperature and humidity monitoring module. Once the concentration of toxic gases in the cabinet exceeds the standard or environmental parameters are abnormal, it immediately triggers an audible and visual alarm and links with the exhaust system to ensure that the storage environment is always within the safe threshold. It is typically used in compliance management scenarios in hospital pharmacies, research centers, and precision chemical workshops.

　　This toxic hemp product fireproof and explosion-proof safety cabinet adopts a double-layer cold-rolled steel plate structure, filled with fireproof and heat-insulating materials between layers, and has excellent fire resistance performance. The overall dimensions of the cabinet are 1818mm high, 1500mm wide, and 860mm deep, with an internal volume of approximately 110 gallons (416 liters) and spacious interior. The cabinet is equipped with 2 adjustable height galvanized steel partitions, which facilitate flexible adjustment of the floor height according to different bottle types. The surface is treated with epoxy resin powder coating, which is resistant to acid and alkali corrosion and easy to clean. There is a standard exhaust interface at the top, which can be connected to external exhaust ducts to achieve continuous ventilation and air exchange, in compliance with international safety storage regulations such as OSHA and NFPA 30.

　　When selecting a toxic hemp fireproof and explosion-proof safety cabinet, it is necessary to clearly distinguish its differences from ordinary flammable cabinets: this model particularly strengthens the "toxic hemp" management attribute and comes standard with VOC intelligent detection probes, suitable for scenarios sensitive to gas leaks. If only storing ordinary paint and solvents, a basic fireproof cabinet can be selected; But if it involves highly toxic substances, anesthetics, or highly volatile reagents, models with intelligent monitoring and alarm linkage must be selected. In addition, attention should be paid to whether the installation site has external exhaust conditions. If there are no exhaust pipes, it is necessary to confirm whether the cabinet supports a built-in filtration circulation system to ensure that the selected toxic hemp fire and explosion safety cabinet matches the actual working conditions.

　　When installing the fire and explosion prevention safety cabinet for toxic hemp products, it is necessary to place it on a flat ground, keep it horizontal, and avoid the cabinet door not closing tightly due to gravity deviation. In daily use, VOC sensors and temperature and humidity probes should be calibrated regularly. It is recommended to conduct an alarm function test once every quarter to ensure sensitive emergency response. Check if the grounding wire is well connected to eliminate the risk of static electricity accumulation. Common faults such as false alarms in alarm systems are often caused by sensor dust accumulation or the presence of interfering gases in the surrounding area. Compressed air can be used to clean the probe or investigate the surrounding environment. Before long-term shutdown, please empty the chemicals in the cabinet and turn off the power to extend the service life of electronic control components.

AfterSalesService :