Intelligent toilet fully automatic flushing, drying and instant heating household toilet

Description :

  Smart toilet is a modern sanitary ware that integrates functions such as automatic flushing, warm air drying, and seat heating, aiming to solve the problems of inconvenient cleaning and hygiene hazards after traditional toilet use. It achieves intelligent operations such as automatic water flushing and nozzle self-cleaning after leaving the seat through built-in high-precision sensors and control systems. Typical working conditions are suitable for home master bedroom bathrooms, high-end hotel rooms, nursing homes, and living spaces with high quality of life requirements. As a popular category in the bathroom wholesale market in southern China, smart toilets not only improve the comfort of using the toilet, but also ensure long-term safety and hygiene standards through water and electricity isolation design and the application of antibacterial materials. They are the core equipment for upgrading modern bathroom spaces.

  In terms of specifications and craftsmanship, smart toilets usually use high-temperature microcrystalline self-cleaning glaze, with a surface smoothness of micrometer level, effectively preventing stain adhesion and bacterial growth. The core components include instant heating modules that ensure constant water temperature without the need for a water storage tank, avoiding secondary pollution; The nozzle material is mostly medical grade stainless steel or antibacterial resin, supporting front and rear mobile cleaning and massage cleaning modes. The implementation of standards must comply with national regulations such as GB/T 34549-2017 "Sanitary Ware Intelligent Toilet", have a waterproof rating of IPX4 or above, and ensure circuit safety in humid environments. Some high-end models are also equipped with LED night lights, remote control panels, and power-off flushing devices. The overall structural design is compact and suitable for most standard pit spacing sewage pipes. The installation size must strictly refer to the product manual to reserve the position of the water inlet and power socket.

  When selecting, it is important to consider the matching of pit spacing, with common specifications of 305mm and 400mm. The measurement error should be controlled within 10mm, otherwise it may lead to installation difficulties or inadequate sealing. For water pressure requirements, smart toilets without water tanks have a certain threshold for household tap water pressure, usually requiring dynamic water pressure greater than 0.09MPa. If the water pressure in old residential areas is insufficient, it is recommended to choose models with built-in water tanks or booster pumps. In addition, it is necessary to distinguish between instant heating and thermal storage. Although instant heating is slightly more expensive, it is more energy-efficient and hygienic; In terms of filtration system, the external PP cotton filter is easy to replace and can further purify the cleaning water. Not applicable scenarios include old renovation projects without reserved power sockets (unless battery powered or modified circuits are selected), as well as non-standard bathroom layouts with complex sewage pipe renovations that cannot guarantee sealing.

  Before installing the smart toilet, it is necessary to check whether the flange ring of the sewage outlet is intact, ensure that the sealing ring is aligned with the center of the sewage outlet, and avoid odor or leakage in the later stage. It is recommended to regularly clean the scale on the nozzle for daily maintenance. Special cleaning agents or white vinegar immersion can be used. It is strictly prohibited to use strong acid and alkali corrosive liquids to wipe the ceramic body and electronic panel. In a typical usage cycle, it is recommended to replace the filter element every 3-6 months, depending on the local water quality. Common malfunctions such as weak flushing are often caused by clogged filter screens and require disassembly of the inlet angle valve for cleaning; If the seat ring does not heat up, check the power connection and temperature control settings. When not in use for a long time, it is recommended to drain the accumulated water in the body and cut off the power supply to extend the service life of electronic components and maintain the stable operation of the smart toilet.

AfterSalesService :