Fully automatic oil-water residue separator, waste oil slag removal and dehydration equipment, waste oil residue separator

Description :

　　Fully automatic oil-water residue separator, waste oil slag removal and dehydration equipment, waste oil residue separator

　　This type of equipment, abbreviated as oil-water residue separator, is a device that uses the principle of centrifugal settling to complete the liquid-solid liquid (oil-water residue) separation of suspension. The horizontal screw settling centrifuge utilizes the difference in specific gravity between the liquid and solid phases of the suspension, generating a strong centrifugal force field after operation, which causes the solid phase to settle under the action of centrifugal force, thereby achieving solid-liquid separation. The principle is that when the material enters the high-speed rotating centrifuge drum, the large particles in the suspension are affected by different centrifugal forces, causing them to settle on the inner wall of the drum and be pushed to the outlet by the internal rotor spiral blade pusher that rotates in the same direction as the drum but has a rotational difference, thus achieving various degrees of solid-liquid (oil-water residue) separation process.

　　Fully automatic oil-water residue separator, waste oil slag removal and dehydration equipment, principle of waste oil residue separator (as shown in the figure)

　　Fully automatic oil-water residue separator, waste oil slag removal and dehydration equipment, technical characteristics of waste oil residue separator:

　　△: Single machine processing capacity is large, operation is stable, energy-saving and environmentally friendly, and occupies a small area.

　　△: Adopting involute planetary gear differential, with large transmission ratio and high precision.

　　△: The main bearings are all imported, with high reliability and long operating life.

　　△: The whole machine is equipped with multiple safety overload protection devices to ensure safe and reliable use.

　　△: The whole machine is equipped with ordinary and explosion-proof electronic control systems to adapt to different working conditions.

　　△: The parts in contact with the material are made of stainless steel material, and important components are forged.

　　△: The inner and outer drums adopt a multi cone angle and large aspect ratio structure to ensure large processing capacity and dry discharge.

　　△: The slag outlet and spiral pushing surface are treated with hard alloy material for strong wear resistance.

　　△: The structural components and overall frame are strictly treated to eliminate internal stress and have high reliability without deformation.

　　△: The bracket can be designed as low center of gravity, high bracket, or mobile according to the needs of the user's workplace.

　　△: Double rotor balance strictly follows national standards and undergoes hard support dynamic balance testing and operation rotation balance testing.

　　△: According to actual needs, it can be equipped with single machine frequency conversion, dual machine frequency conversion, and PLC intelligent fully automatic electrical control system.

　　Note: The above are the overall technical characteristics, and specific parameters can be determined according to the characteristics of the user's separated materials and the operating conditions.

　　Fully automatic oil-water residue separator, waste oil slag removal and dehydration equipment, waste oil residue separator (shown in the actual picture)

AfterSalesService :

• Oil-water residue separator