Pulse valve explosion-proof pulse valve electromagnetic pulse valve

Description :

　The electromagnetic pulse valve diaphragm divides the right angle electromagnetic pulse valve into two chambers, front and rear. When the electromagnetic pulse valve is connected to clean compressed air in the pulse bag filter cleaning system, the compressed air enters the rear chamber through the throttle hole. At this time, the pressure in the rear chamber presses the diaphragm tightly against the valve outlet, and the pulse valve is in the closed state. The pulse controller outputs a signal to move the pulse valve armature, open the exhaust hole in the rear chamber, and quickly lose pressure in the rear chamber, causing the diaphragm to move backward. Compressed air is sprayed through the valve outlet, and the pulse valve is in the open state. The spraying starts, and the electrical signal output by the pulse controller disappears. The electromagnetic pilot head armature of the pulse valve is reset, and the exhaust hole in the rear chamber is closed. The increase in pressure causes the diaphragm of the pulse valve to tightly adhere to the outlet of the valve, and the pulse valve is in a closed state, stopping the injection, The length of the blowing time and the size of the air volume are controlled by the controller.

　　The actual blowing air volume of DMF-Z-40S electromagnetic pulse valve DC24V is not only determined by the size of the connecting diameter, but also by the interface size, which often cannot determine its dust cleaning function. Our solid and sincere footprints have been left in industries such as steel metallurgy, non-ferrous metallurgy, intelligent self-control systems, construction cement, chemical industry, dust and severe enterprise dust blowing and removal equipment installation, industrial boiler power plants, as well as urban waste incineration, bag filter equipment matching, environmental protection equipment, etc. This increases your range of choices and is an option for your electric bag modification. The pulse valve stem is stuck at a certain position (not a tight fit position) inside the valve seat hole, causing the piston to always be under pressure. Therefore, if the difference between the input medium and the output medium is too large, a valve with a similar diameter should be re selected. Therefore, it is sensitive and reliable. It has a wide range of applications and is a commonly used type. When the pressure of the steam drum or superheater exceeds the specified value, the steam enters the pulse spring safety valve through the impulse conduit and valve, pushing the valve core open. After passing through the pulse spring safety valve, the steam enters the upper part of the main safety valve piston, causing the piston to move downward, opening the main safety valve, and releasing the steam pressure.

AfterSalesService :