Manufacturer wholesale starch centrifugal dehydration equipment centrifuge

Description :

　　Manufacturer wholesale starch centrifugal dehydration equipment centrifuge

　　sketch:

　　Starch is a high molecular weight carbohydrate, which is a polysaccharide composed of a single type of sugar unit. The basic unit of starch is α - D-Pyrstarch (2 sheets) glucose, and the covalent polymer formed by the connection of glucose molecules through glycosidic bonds after removing water molecules is called starch molecules. Starch belongs to polydextrose, and the molecular formula of free glucose is represented by C6H12O6. After dehydration, the unit of glucose is C6H10O5. Therefore, starch molecules can be written as (C6H10O5) n, where n is an indefinite number. The number of structural monomers (dehydrated glucose units) that make up starch molecules is called the degree of polymerization, expressed in DP.

　　Starch is a nutrient stored in the plant body, stored in seeds and tubers, and the starch content is relatively high in all types of plants. Starch can be regarded as a high polymer of glucose. It is the product of photosynthesis by green plants using carbon dioxide and water in the air, and is the main nutrient component that humans, animals, and plants rely on for survival. It can be extracted from starchy substances such as corn, sweet potato, wild acorns, and kudzu root.

　　In starch industry production, horizontal centrifugal separators or horizontal spiral settling centrifuges are used instead of flow channels to separate proteins. Spiral liquid separators are also used, but their effectiveness is not as good as horizontal spiral settling centrifuges. The concentration of starch separated and refined by a separator can reach 20 degrees.

　　Then we use our new horizontal settling centrifuge for dehydration and drying to obtain a dry productWater content is about 38-40%The starch. The machine runs smoothly, has good continuous performance, low noise, and no consumables such as filters. It has good substitutability for horizontal filtration centrifuges!

　　The separation principle of this centrifuge:

　　The centrifuge host is composed of a rotary drum, a screw propeller, a large end support plate, a small end support plate, a differential, a main drive motor, an auxiliary drive motor, a hydraulic coupling, a bearing seat, a rotating body cover, a transmission cover, a transmission belt, a control box, and a base. The rotor and propeller are the core components of the centrifuge, where the solid-phase separation of drilling fluid is carried out.

　　When the centrifuge is working, the drilling fluid enters the centrifuge through the inlet pipe, and under the action of the centrifugal force field, the material forms a liquid ring on the inner wall of the rotating drum. The solid phase with high density is thrown to the outer layer of the liquid ring and tightly adheres to the inner wall of the rotating drum to form a solid phase layer, while the liquid phase with low density and solid phase are in the inner layer of the liquid ring. The scraper of the screw propeller scrapes off the solid layer attached to the inner wall of the rotary drum and pushes it towards the small end dehydration zone. The solid particles in the dehydration zone are squeezed and dehydrated by the centrifuge, squeezing out all the free water and then being sent by the screw propeller to the small end bottom flow nozzle for discharge. The liquid phase in the inner layer of the liquid ring is discharged from the overflow hole at the large end and enters the circulation system.

AfterSalesService :

• Starch centrifugal dehydration equipment