Three phase horizontal screw centrifugal oil residue water separation equipment

Description :

　　Three phase horizontal screw centrifugal oil residue water separation equipment

　　sketch:

　　Internationally, the earliest produced centrifuge is the two-phase decanter centrifuge, also known as the solid-liquid separation centrifuge. The two-phase decanter centrifuge is further divided into solid-liquid separation, liquid-liquid separation, solid-phase concentration, particle wet classification, and sealed explosion-proof. Different mechanisms have different processing requirements and uses for the centrifuge, and the design parameters are adjusted accordingly. For example, the centrifuge used for sludge dewatering is not suitable for liquid-liquid separation, and the centrifuge used for dye grading is not suitable for separating flammable and explosive materials. Therefore, the selection of two-phase horizontal screw centrifuge is very important and must be finalized according to specific production process requirements. later stage,Three phase spiral centrifugeDeveloped from the evolution of the two-phase horizontal screw centrifuge, the three-phase horizontal screw centrifuge is mainly used in the energy industry, especially in the petroleum industry, abroad. The principle of a three-phase spiral centrifuge is the separation of solid, liquid, and liquid phases, commonly referred to asThree phase separation of oil-water residueIn this way, a three-phase horizontal screw centrifuge can solve the separation of three materials at once.

　　Three phase spiral centrifugeworking principle：

　　Solid-liquid separation

　　The working principle of the three-phase separation horizontal spiral discharge settling centrifuge is basically similar to that of the ordinary horizontal spiral discharge settling centrifuge. After two liquids and one solid enter the centrifuge, the solid-liquid specific gravity difference is utilized, and the centrifugal force field is used to expand it by thousands of times. The solid phase is settled under the action of centrifugal force, and the two liquid phases are also layered, thus achieving solid-liquid three-phase separation, and being discharged from the body under the action of special mechanisms. The entire feeding process and separation process are continuous. Sealed, automatically completed.

　　Solid-liquid separation

　　The working principle of the three-phase separation horizontal spiral discharge settling centrifuge is basically similar to that of the ordinary horizontal spiral discharge settling centrifuge. After two solids and one liquid enter the centrifuge, the solid liquid solid specific gravity difference is utilized, and the centrifugal force field is used to expand it by thousands of times. The heavy solid phase is settled under the action of centrifugal force, and the liquid phase is also layered, while the light solid floats up, thus achieving the separation of solid liquid solid three-phase and being discharged from the body under the action of special mechanisms. The entire feeding process and separation process are continuous. Sealed, automatically completed.

　　As shown in the picture:

　　Equipment advantages:

　　Three phase horizontal screw centrifugal oil residue water separation equipmentStrong production capacity. Continuous 24-hour work, high processing capacity, good separation effect, and low labor cost. Fully automated operation, reliable operation, no need for manual intervention. Only one person is needed per shift, which requires low technical skills from workers and reduces labor costs. Long service life. Under normal operating conditions, the fault free operation of the horizontal spiral settling centrifuge shall not be less than 8000 hours; And the service life shall not be less than 8 years.

　　Three phase horizontal screw centrifugal oil residue water separation equipmentCompact structure. Small footprint, easy to operate, convenient to maintain with low maintenance costs, and complete and reliable safety protection devices. This machine is equipped with multiple protections such as torque protection, power control, electrical interlocking, and sound and light alarms, which can effectively eliminate or reduce the damage caused by sudden faults to the machine.

AfterSalesService :

• Three phase spiral centrifuge