Manufacturer direct sales WLS355 oil cement three-phase separator - oil sludge treatment three-phase horizontal screw centrifuge

Description :

　　WLS355 oil cement three-phase separator - oil sludge treatment three-phase horizontal screw centrifuge

　　WLS355 oil cement three-phase separator - Introduction:

　　WLS355 oil cement three-phase separatorThe working principle is that two liquid phases and one solid phase enter the centrifuge and are expanded thousands of times by the centrifugal force field. The solid phase is settled under the action of centrifugal force, and the two liquid phases are also layered, thus achieving solid-liquid three-phase separation and being discharged from the body under the action of special mechanisms. The entire feeding and separation process is continuous, closed, and automated.

　　WLS355 typeOil cement three-phase separator-Structure composition of three-phase horizontal spiral centrifuge for oil sludge treatment:

　　It is mainly composed of components such as drum, screw, differential, frame, housing, and motor. The drum adopts a double cone angle design, and the inner wall of the drum is specially designed with longitudinal concave convex grooves to improve the efficiency of spiral conveying of solid phase. The working surface of the spiral blade has a hard alloy protective layer, which effectively improves the wear resistance life of the spiral blade. The main motor is controlled by the main frequency converter, and the auxiliary motor is controlled by the auxiliary frequency converter. The frequency of the motor can be adjusted arbitrarily. The power supply of the auxiliary frequency converter is provided by the main frequency converter, known as DC common bus power supply. DC common bus power supply realizes energy feedback when the auxiliary motor is in the working state of the generator, which can effectively save electricity.

　　When the material to be separated is transported by the feed pump to the centrifuge drum, the high-speed rotating drum generates strong centrifugal force to settle solid particles with higher density than the liquid phase onto the inner wall of the drum. Due to the different rotational speeds of the screw and the drum, there is relative motion between the two (i.e., adjustable speed difference), and the solid (slag) with higher density settles onto the drum wall. Two phases of clear liquid with different densities form concentric cylinders, with the lighter liquid phase in the inner layer and the heavier liquid phase in the outer layer. The thickness of different liquid rings can be adjusted by adjusting the liquid plate (i.e. the water content in the oil or the oil content in the water can be adjusted). The slag deposited on the wall of the rotary drum is transported by the screw conveyor to the cone end of the rotary drum, and discharged into the solid material tank from the discharge port. Water and oil are discharged from their respective outlets, and the entire three-phase separation process of oil, water, and slag is automatically fed and discharged.

　　WLS355 typeOil cement three-phase separatorOverview of Separation Technology:

　　Acceleration of material feeding → siphon feeding → fluid pressure → separation body stabilization (disc) → slag discharge → self-priming pump discharge.

　　Separation effect factors

　　Separation factor, effective cavity length to diameter ratio, air negative pressure, fluid pressure, fluid steady state.

　　field control

　　The drum rotates far away and the rotating speed of the feed is different.

　　advantage

　　Suitable for floating and viscous materials, with high processing capacity, clear liquid, smooth slag discharge, separation of distance and distance, extended service life of equipment, energy saving and consumption reduction.

　　Scope of Application

　　Non volatile, non-toxic, non flammable and non explosive materials; In situations where the production volume is large and high requirements are placed on the slag and clear liquid after separation; The special material with diverse physical properties in the mixed material liquid.

　　Part of the marketOil cement three-phase separatorIt can be equipped with a centripetal pump, and one of the two liquid phases can be discharged by the centripetal pump, while the other liquid phase is discharged through the casing collection chamber. The use of a centripetal pump for liquid discharge can reduce liquid vaporization and prevent the separated liquid phases from leaking and remixing inside the casing.

　　Application fields of WLS355 oil cement three-phase separator: (Figure)

AfterSalesService :

• Oil cement three-phase separator