Corn soap oil waste treatment equipment Corn soap oil three-phase separation equipment

Description :

　　Corn soap oil waste treatment equipment Corn soap oil three-phase separation equipment

　　The three-phase separator, collectively referred to as a separation machine, uses the principle of centrifugal settling to continuously separate the solid liquid (water) - liquid (oil) phases in a suspension. The working principle is that after the working speed of the centrifuge reaches the rated speed, the suspension (material to be separated) passes through a high-level tank or feed pump with a stirrer, and the flow rate is controlled by a flow control valve. The material enters the spiral feeder through the feed channel of the centrifuge, accelerates by the accelerator, and enters the drum. Under the action of centrifugal force, the solid phase is thrown towards the inner wall of the drum. The blades of the spiral feeder use a certain speed difference to push the solid sediment towards the small end of the drum, and after passing through the drying zone, it is discharged from the slag discharge outlet. The liquid phase forms concentric layers of different depths inside the drum, flows towards the large end of the drum, adjusts the depth of each liquid pool through the overflow plate, and finally discharges from their respective discharge ports. This continuous cycle achieves the goal of continuous separation of solid liquid liquid three-phase.

　　Corn soap oil waste treatment equipment Corn soap oil three-phase separation equipment (three-phase separator)

　　Corn soap oil waste treatment equipment Corn soap oil three-phase separation equipment (three-phase separator) Overall advantages:

　　1. High speed, high separation factor, large aspect ratio.

　　2. Single machine processing capability is large. The horizontal spiral discharge settling series centrifuges with diameters of 355, 400, 450, 500, 530, 580, 650, 760, and 900 (mm) are based on fluid theory and refer to foreign structural planning. They have large disposal capacity and good separation effect.

　　3. Low oscillation, low noise, and strong load-bearing capacity. The main bearings of this series of centrifuges are all imported bearings, which have high precision and strong load-bearing capacity. The precision of component manufacturing is high, and the whole machine is finely balanced by dual rotors to ensure stability and reliability during high-speed operation. The centrifuge has low oscillation, low noise, and all functions meet the requirements of national standards.

　　4. Equipped with multiple maintenance devices, it operates reliably. This series of centrifuges is usually equipped with differential overload maintenance or torque limiting couplings and other maintenance devices. According to the needs, safety maintenance devices such as oscillation maintenance, temperature monitoring and maintenance, and feed conditioning can also be equipped to maintain the entire machine through active alarm and forced shutdown.

　　5. The differential system can be reliable. The differential of this series of centrifuges usually uses planetary gears or cycloidal pinwheel differentials, and can also be equipped with a fully hydraulic differential system according to needs. Mechanical differentials are usually selected from well-known domestic brands, while hydraulic differential systems are selected from imported brands. The differential has high precision in manufacturing, good functionality, and reliable operation.

　　6. Key parts are corrosion-resistant and wear-resistant. The key parts such as the spiral feeding surface, the spiral body feeding and dispersing area, and the slag outlet of the rotary drum are usually sprayed or welded with a hard alloy wear-resistant layer. For special use centrifuges, embedded hard alloy wear-resistant blocks, wear-resistant sleeves, or wear-resistant ceramic plates are selected for anti-corrosion, wear-resistant, and long service life.

　　7. It has multiple driving and speed regulation methods. According to different needs, corresponding drive, differential speed, and speed regulation methods can be selected to facilitate the adjustment of drum speed and differential speed, in order to achieve the desired separation effect and adapt to various different separation situations.

　　8. Good sealing and explosion-proof function. There are specially planned and produced sealing and explosion-proof models for special separation occasions such as flammable and explosive situations for selection, and the sealing and explosion-proof functions are good, safe and reliable. The service life of mechanical seals is guaranteed to be 8000 hours, and the service life of airtight seals is guaranteed to be over 15000 hours.

　　9. Electrical control system, reliable. The electrical control system includes ordinary type, explosion-proof type, and microcomputer fully active control. CDS center control system can also be selected for long-distance monitoring and fully active operation according to needs. The electrical control system uses well-known domestic brands or imported components, with reliable functions.

　　10. Excellent material selection. The parts of this series of centrifuges that come into contact with materials are usually made of high-strength austenitic stainless steel or duplex stainless steel, and the components have satisfactory strength and excellent corrosion resistance.

AfterSalesService :

• Corn soap oil waste treatment equipment