Lishui Ruichen Oil Mud Separation Equipment Oil Mud Centrifugal Separation Oil Mud Dehydration Equipment

Description :

　　Lishui RuichenOil sludge separation equipment Oil sludge centrifugal separation, oil sludge removal and dehydration equipment

　　Overview of Oil Mud Treatment Project:

　　Oil sludge is a type of oil that originates from the process of oil extraction and productionOil sludge separation equipmentThe three-phase spiral centrifuge is mainly used to concentrate and dehydrate oil sludge, reduce its oil content, and then perform other treatments. The oil sludge treatment process mainly involves solid-liquid separation, and many oilfield enterprises use vacuum filters. However, its drawbacks are also very obvious, because the filtered oil and water cannot be separated normally, and the oil pollution enters the sewage treatment system again, increasing the economic cost of sewage treatment. Generally, after the oil sludge is treated with a vacuum filter, it needs to be incinerated or the sludge cake needs to be centrally buried. However, during the incineration process, a large amount of toxic and harmful gases and dust that pollute the environment are generated, seriously endangering the quality of life of local residents. The mud cake produced after filtration by the filter still has a relatively high water and oil content, and increases the labor intensity to a certain extent.

　　After long-term experience in oil sludge treatment in oil fields, the use of oil sludge separation equipment (three-phase horizontal screw centrifuge) has shown outstanding results in treating oil sludge, significantly improving the processing capacity and efficiency of oil sludge. It is indeed an efficient methodOil sludge separation equipment.

　　Oil sludge separation equipmentThe working process of the three-phase horizontal spiral centrifuge is as follows: the suspension that needs to be separated is continuously transported into the machine through the feed pipe, enters the discharge port of the spiral conveyor, and enters the high-speed rotating drum. Under the action of the centrifugal force field, the suspension forms a circular liquid flow in the drum, and the solid particles quickly settle on the inner wall of the drum under the action of centrifugal force. The differential speed between the drum and the spiral conveyor is generated by the differential, and the sediment is pushed to the drying zone at the cone end of the drum by the spiral conveyor. Through the spiral conveyor, the thrust of the sediment collector and the centrifugal force of the sediment are squeezed in both directions, so that the sediment is further squeezed and dehydrated. After separation, the clear liquid is discharged from the slag discharge port at the small end of the drum. Overflow outlet for discharge.

　　The working principle of the oil sludge separation equipment (three-phase horizontal screw centrifuge):

　　A three-phase spiral centrifuge is a device that uses the principle of centrifugal settling to separate suspensions. Its working principle is that when the suspension to be separated enters the drum of the centrifuge, solid particles with a higher density than the liquid phase quickly settle to the inner wall of the drum under the centrifugal force of the drum. The screw conveyor inside the centrifuge pushes the solid particles deposited on the inner wall of the drum towards the drying zone at the small end of the drum for further dehydration, and then discharges them through the slag outlet. The separated clear liquid flows out from the overflow weir at the large end of the drum. The decanter centrifuge can continuously feed, separate, wash, and discharge materials at full speed. It has the characteristics of compact structure, continuous operation, smooth operation, strong adaptability, high production capacity, and convenient maintenance. Suitable for separating suspensions containing solid particles with a particle size greater than 0.005mm and a concentration range of 2-40%.

　　Application of Lishui Ruichen Oil Mud Separation Equipment - Three phase Horizontal Spiral Centrifuge in Oil Mud Treatment:

　　The three-phase horizontal screw centrifuge has shown great superiority in oil sludge treatment, as it can not only separate the solids in the oil sludge, but also separate the dirty oil in the oil sludge. At the same time, the moisture and oil content of the dry mud treated by the three-phase spiral centrifuge decreased.

　　Advantages of manufacturers of oil sludge separation equipment (three-phase horizontal screw centrifuge):

　　Lishui Ruichen is a chemical company that integrates research and development, production, customization, and sales of oil sludge treatment equipment, oil sludge sand treatment equipment, tank bottom oil sludge treatment equipment, and oily sludge treatment equipment. For many years, we have been committed to the research of separation technology for oily sludge (oil sludge sand) in oil fields, and have successfully provided various centrifugal separation equipment solutions for oil sludge treatment to many customers. If you have any issues with the treatment of oily sludge (oily sludge, oily sand), please feel free to contact our manufacturer.

AfterSalesService :

• Oil sludge separation equipment