Lishui Ruichen Oil Mud Solid Liquid Separation Machine Oil Mud Centrifugal Separators Oil Mud Solid Control Separators Manufacturer

Description :

　　Lishui Ruichen Oil Mud Solid Liquid Separation Machine Oil Mud Centrifugal Separators Oil Mud Solid Control Separators Manufacturer

　　Abbreviation: Two phase horizontal spiral centrifuge, is a type of centrifuge that uses the principle of centrifugal force separation. After the drum and screw conveyor of the oil sludge solid-liquid separator are started to full speed, a strong centrifugal force field is generated due to rotation. The suspended liquid material is added to the screw through the feed pipe, and the material enters the drum through the discharge hole in the screw cylinder. Under the action of the centrifugal force field, the solid phase material with a high specific gravity settles on the drum wall, forming a ring-shaped solid phase layer. The screw conveyor, under the action of the differential (differential is a device that ensures stable differential speed, a dual frequency conversion speed regulation device that shares the busbar, realizes stepless adjustment of drum speed and differential speed, can adapt to changes in flow rate and concentration, and ensure good and stable separation effect), makes the screw and The drum generates a constant differential speed, Push the dehydrated solid sediment out of the small end slag outlet of the conical drum, while the clear liquid with light specific gravity overflows from the overflow outlet at the cylindrical end. This continuous operation achieves the goal of continuous separation.

　　Oil sludge solid-liquid separation, oil sludge centrifugal separator, oil sludge solid control separatorstructure

　　It is mainly composed of a drum, a screw conveyor, large and small end cover shafts, left and right bearing seats, differential, motor transmission components, machine base, hood, electrical control box and other components. Its structure and external dimensions are shown in the above figure.

　　Oil sludge solid-liquid separation, oil sludge centrifugal separator, oil sludge solid control separatorTechnical performance and advantages

　　[1] It is composed of a cylindrical conical drum, an internal screw conveyor, and a differential. Under the action of centrifugal force, it can continuously dehydrate sludge for 24 hours.

　　[2] The spiral adopts a patented structural design, which increases the squeezing force inside the spiral, greatly reduces the moisture content of the sludge, and ensures the constant dryness of the sludge. The spiral structure of the patent improves the slag discharge conditions, ensuring smooth slag discharge without material blockage during operation, and can adapt to sludge dewatering of various components.

　　[3] It does not require watering when starting up, making installation and use extremely convenient and saving industrial water.

　　[4] AdoptingDual frequency conversion drive system,This drive system is widely used internationally (such as Sweden's a-Laval, Germany's Flottwege, Westfalia (GEA), Italy's PIERALISI, Austria's ANDRITZ, etc.). The main motor of the system is controlled by a frequency converter and directly drives the centrifuge drum through a V-shaped tape. The auxiliary motor of the differential system is controlled by a frequency converter to control the input shaft speed of the differential through V-shaped tape, in order to achieve the purpose of controlling the screw differential speed.

AfterSalesService :

• Oil sludge solid-liquid separator