Plant oil extraction three-phase separation equipment Plant oil separation three-phase horizontal screw centrifugal machine oil water residue separator

Description :

　　Plant oil extraction three-phase separation equipment Plant oil separation three-phase horizontal screw centrifugal machine oil water residue separator

　　Referred to as the three-phase horizontal spiral centrifuge, this equipment can perform three-phase separation of solid-liquid (oil-water residue). It is a separation technology that uses a self-priming pump to automatically discharge and settle the centrifuge. Based on the theoretical basis of the WL series pressurized horizontal spiral automatic discharge and settling centrifuge separation technology, the negative air pressure and fluid pressure generated by the kinetic energy of high-speed rotation are converted into the energy of solid-liquid separation and the discharge pressure of the self-priming pump, reducing the feeding resistance and assisting the cone end discharge speed. The design of the gyroscope effect of the host rotating body ensures stability under high operating conditions and the stability of rapid axial flow of liquid phase materials in the drum chamber, increasing the processing capacity per unit time; The secondary separation thrust angle structure stabilizes the pressure when the fluid is discharged, and the tangential discharge in the opposite direction of the drum rotation stabilizes the pressure zone inside the drum chamber. At the same time, the discharged pressure liquid provides power to the drum body, achieving energy-saving and consumption reducing effects.

　　The phase self-priming pump fluid pressure boosting separation technology has realized small cylinder diameter, large processing capacity, smooth feeding, fast separation, fluid pressure assisted rapid slag removal, no slag material accumulation in the cylinder, drier slag discharge, less wear of equipment parts, fluid pressure self-priming pump liquid discharge to press foam, lower solid content of clear liquid after separation, effectively solving the technical defects of the existing horizontal spiral automatic discharge sedimentation centrifuge, such as small processing capacity, incomplete separation, difficult discharge, easy blockage in the cylinder, large wear of equipment parts, etc.

　　Plant oil extraction three-phase separation equipment Plant oil separation three-phase horizontal screw centrifuge separation technology

　　Feed material acceleration → siphon feeding → fluid pressure → separation body stabilization → slag discharge → self-priming pump discharge.

　　Separation effect factors

　　Separation factor, effective cavity length to diameter ratio, air negative pressure, fluid pressure, fluid steady state.

　　field control

　　The drum rotates far away and the rotating speed of the feed is different.

　　advantage

　　Suitable for floating and viscous materials, with high processing capacity, clear liquid, smooth slag discharge, separation of distance and distance, extended service life of equipment, energy saving and consumption reduction.

　　Scope of Application

　　Non volatile, non-toxic, non flammable and non explosive materials; In situations where the production volume is large and high requirements are placed on the slag and clear liquid after separation; The special material with diverse physical properties in the mixed material liquid.

　　Plant oil extraction three-phase separation equipment Plant oil separation three-phase horizontal screw centrifuge Introduction:

AfterSalesService :

• Plant oil extraction three-phase separation equipment