Solid liquid liquid three-phase separation centrifuge Three phase centrifuge Oil water residue separator Manufacturer direct sales

Description :

　　Solid liquid liquid three-phase separation centrifuge Three phase centrifuge Oil water residue separator

　　This series, collectively known as the three-phase horizontal screw centrifuge, is a new type of horizontal screw centrifuge with advanced technical performance. It achieves effective separation of light liquid, heavy liquid, and solid phase in the same equipment, completely replacing the traditional complex three-phase separation process of solid-liquid two-phase separation and liquid-liquid separation, improving separation efficiency and reducing investment costs. It is a new product worth promoting in chemical, food, and petroleum industries such as palm oil, fish oil, coal tar, oilfield recovered oil, and catering waste oil.

　　Solid liquid liquid three-phase separation centrifugestructural characteristics

　　1. This machine is designed, processed, and manufactured using technology from Humboldt, Germany;

　　Structural form: Horizontal spiral discharge settling centrifuge, which continuously separates solid liquid liquid three-phase under the action of centrifugal force;

　　Discharge method: The dehydrated solid mud cake is pushed out of the drum by the discharge screw and then discharged by gravity Separate heavy and light liquids and discharge them separately from the drum under the action of centrifugal force, and then discharge them through gravity;

　　Equipment composition: drum, screw, main motor, belt transmission system, mechanical differential; Machine base, casing, feed pipe, bearings, shock absorbers; Vibration switch, on-site emergency switch, comprehensive start control cabinet for dehydration system.

　　2. Adopt aspect ratio

　　L/D=5.0、 High speed, high separation factor, small differential system; Large aspect ratio increases

　　Added clarification and dehydration retention time of materials inside the machine; High speed has a large centrifugal force field, and small differential reduces the agitation of materials by the spiral, increases the dewatering residence time, and thus improves the separation effect of sludge dewatering and clarification;

　　3. Differential adjustment range: 4-30r/min.

　　4. The large end of the drum is equipped with an adjustable weir plate, which can adjust the depth of the heavy liquid layer inside the drum. The adjustable light liquid oil pipe on the large end can easily adjust the depth of the light liquid layer to ensure the separation effect of each phase;

　　5. This machine is a counterflow type used for three-phase separation of materials.

　　6. The machine is equipped with overload alarm, fault alarm device and automatic shutdown device;

　　7. The main bearings are made of SKF and lubricated with grease. The frequency converter is made of Emerson products, and the drive belt is made of Samsung products from Japan; PLC、 Electrical components and motors are products of branded companies.

　　Solid liquid liquid three-phase separation centrifugeEquipment assembly and material specifications:

　　Centrifuge - continuously separates liquids and solids with different densities. Solid phase is discharged by gravity, while liquid phase is discharged by gravity through an overflow weir. To ensure the lifespan of the centrifuge, all parts in contact with the material are made of stainless steel; Adopting advanced welding processing technology and conducting solid solution treatment ensures the intergranular corrosion resistance of the material. Other components are coated with multiple layers of protective paint.

　　Color

　　S. C.I Smoke Grey Epoxy Paint

　　Sealing: The bearing is a nitrile rubber lip seal, and the drum is a labyrinth seal

　　Inner wall: Longitudinal 316L stainless steel ribs increase tangential resistance and serve as wear protection to prevent solid particles from sliding on the inner wall of the drum and causing wear on the drum;

　　Cover material: AISI304 stainless steel (can be customized according to customer requirements)

　　Underframe: Made of carbon steel welded together, it undergoes heat treatment to relieve stress and ensure stable operation of the machine. According to the painting process requirements, the surface should be sandblasted to remove the oxide layer, and then sprayed with anti rust paint. After passing the test run, the primer and topcoat should be applied;

　　Bearing seat: Made of ductile iron QT400 precision casting, heat treated, and then processed by CNC boring machine. According to the requirements of the painting process,

　　Spray sand on the surface to remove the oxide layer, then spray anti rust paint. After passing the test drive, apply primer and topcoat;

　　Slag discharge cover: integrated with the outer cover of the drum

　　Drum and screw assembly: interchangeable and easy to maintain

　　Belt protective cover: manufactured according to Chinese safety standards

　　Lubrication system: manually operated, using a centralized lubrication system

　　Sealing technology: The centrifuge and pipeline system adopt a fully sealed structure, and the feed inlet is sealed and connected with a flexible joint. The outlet is also sealed and connected with a flexible joint. The sludge outlet can be controlled by a knife gate valve, and sludge, sewage, odor, etc. will not overflow. The operating environment is clean and hygienic;

　　Wear resistant technology: The slag discharge port of the rotary drum is equipped with wear-resistant lining and sprayed with tungsten carbide GNi-W2C-65%; The spiral feeding port has a tungsten carbide layer, and the spiral blades are sprayed with tungsten carbide or hard alloy protective tiles for wear protection. The tungsten content is as high as 65%, with a thickness of 3mm, which improves wear resistance, is not easy to fall off, and extends the service life;

　　Drum drive: main motor, belt drive, spiral drive: frequency converter - auxiliary motor - differential

　　Shock absorber form: Rubber damping shock absorber

AfterSalesService :

• Three phase separation centrifuge