Pure domestic three-phase horizontal centrifuge sedimentation type three-phase horizontal centrifuge manufacturer

Description :

　　Pure domestic three-phase horizontal centrifuge sedimentation type three-phase horizontal centrifuge manufacturer

　　The three-phase horizontal screw centrifuge, also known as the oil-water slag three-phase separator, is a series of equipment introduced by our company from abroad in 1998. We have conducted deeper research and development on this technology. Currently, the three-phase horizontal screw centrifuge is widely used for the separation of oil, water, and slag in the coal tar industry; The separation of oil, water, and slag in the petrochemical industry, the separation of oil, water, and slag in the fishing powder industry, the separation of oil, water, and slag in the swill oil industry, the separation of oil, water, and slag in the electrolytic copper industry, and the separation of oil, water, and slag from waste materials in slaughterhouses.

　　The basic principle of three-phase spiral centrifuge (as shown in the figure)

　　Scope of application of three-phase spiral centrifuge:

　　1. Material concentration:

　　The material is required to have good flowability, with no impact on the feed. The weight percentage of the mixed liquid-solid phase concentration is generally ≤ 20% (good flowability can be appropriately relaxed).

　　2. Material temperature:

　　The allowable material temperature for this centrifuge is ≤ 900C.

　　3. Separation range:

　　A、 When the viscosity of the liquid phase is low and the particle size of the solid phase is large, it is required that the difference in specific gravity between solid, liquid, and liquid be ≥ 0.05g/cm3 (solid weight, liquid weight).

　　B、 When the viscosity of the liquid phase is low and the difference in specific gravity between the solid and liquid phases is large (specific gravity difference ≥ 1g/cm3), it is required that the solid phase particles be ≥ 0.005mm and the difference in specific gravity between the liquid and liquid phases be ≥ 0.05g/cm3.

　　C、 When the viscosity of the liquid phase is high or the solid-liquid density is small and the solid particles are very fine, it will affect the separation effect and may even be unsuitable.

　　D、 When solid particles are easily damaged, it will also affect the separation efficiency.

　　If you need to learn more about related content, please contact our staff!

AfterSalesService :

• Pure domestic three-phase horizontal screw centrifuge