Swill oil residue water three-phase separator, swill oil residue dewatering separator, swill oil purification and slag removal machine

Description :

　　Swill oil residue water three-phase separator, swill oil residue dewatering separator, swill oil purification and slag removal machine

　　During the production process, kitchen waste generates various types of waste oil, known as swill oil. They come from the waste generated during the processing of kitchen waste. Most of these swill oils contain a high proportion of oil, which can be mixed with crude oil and processed in refineries. If waste oil is treated, not only can the cost of cleaning waste oil be reduced, but oil can also be recovered from waste oil, thereby generating profits.

　　Under normal circumstances, it needs to be purified to obtain an oil phase. The aqueous phase can also be further separated and treated at a lower level to avoid the treatment cost of oily wastewater.

　　Typical application scope:

　　1Swill oil residue removal and dehydration separatorUsed for processing waste oil.

　　2. AdoptingThree phase separation machine for swill, oil residue, and waterTo finely separate the oil phase, as it contains a large amount of crude oil that can be further processed in refineries.

　　3. The aqueous phase can be further treated in existing sewage treatment plants.

　　4. The cleaning fee is only used for the separated solids.

　　The principle of the three-phase separator for swill, oil residue, and water is as follows:

　　Waste oil enters the spiral cavity from the feed pipe and enters the rotary drum through the spray port near the bottom of the cone end of the spiral small head. Under the action of centrifugal force field, the liquid phase in the slurry is separated by the solid phase set on the rotating wall, and the solid particles are trapped in the rotary drum; At the same time, the solid particles inside the drum move from the small end of the drum to the large end of the drum under the action of centrifugal force and the differential speed between the spiral and the drum. During this movement, due to the increase in the rotating diameter, the centrifugal force increases rapidly, and the solid phase enters the drum from a high moisture content solid phase at the beginning to a low moisture content solid phase when it is discharged from the drum, thus achieving automatic and continuous separation of the solid-liquid phase.

　　Technical characteristics of the three-phase separator for swill, oil residue, and water:

　　△: Single machine processing capacity is large, operation is stable, energy-saving and environmentally friendly, and occupies a small area. △: Adopting involute planetary gear differential, with large transmission ratio and high precision. △: The main bearings are all imported, with high reliability and long operating life. △: The whole machine is equipped with multiple safety overload protection devices to ensure safe and reliable use. △: The whole machine is equipped with ordinary and explosion-proof electronic control systems to adapt to different working conditions. △: The parts in contact with the material are made of stainless steel material, and important components are forged. △: The inner and outer drums adopt a multi cone angle and large aspect ratio structure to ensure large processing capacity and dry discharge. △: The slag outlet and spiral pushing surface are treated with hard alloy material for strong wear resistance. △: The structural components and overall frame are strictly treated to eliminate internal stress and have high reliability without deformation. △: The bracket can be designed as low center of gravity, high bracket, or mobile according to the needs of the user's workplace. △: Double rotor balance strictly follows national standards and undergoes hard support dynamic balance testing and operation rotation balance testing. △: According to actual needs, it can be equipped with single machine frequency conversion, dual machine frequency conversion, and PLC intelligent fully automatic electrical control system. Note: The above are the overall technical characteristics, and specific parameters can be determined according to the characteristics of the user's separated materials and the operating conditions.

　　If you need to learn more about related equipment information, please contact us!

AfterSalesService :

• Three phase separation machine for swill
• oil residue
• and water