Centrifugal Concentrator Dehydrator Integrated Machine Sludge Concentrator Dehydrator Integrated Equipment Centrifugal Concentrator Dehydrator

Description :

　　Centrifugal Concentrator Dehydrator Integrated Machine Sludge Concentrator Dehydrator Integrated Equipment Centrifugal Concentrator Dehydrator

　　Abbreviation: Horizontal centrifugal dewatering machine, is a device that uses the principle of centrifugal settling dewatering to continuously separate the solid-liquid suspension. The solid phase is continuously pushed out by a spiral. This machine is a continuous and efficient solid-liquid separation and classification equipment, with the following characteristics:

　　1. Widely applicable and adaptable to materials, it can be widely used in industrial sectors such as sewage treatment plant sludge dewatering, water plant sludge dewatering, chemical industry, light industry, food, papermaking, mining, etc. It is suitable for liquid-solid separation of suspensions with a solid phase weight concentration ≤ 10% (or a volume concentration ≤ 50% after 24 hours of free settling), solid particle equivalent diameter ≥ 0.005-2mm, liquid-solid weight difference ≥ 0.05 g/cm3. It can effectively dehydrate materials such as calcium carbonate, calcium sulfate, polyvinyl chloride, distiller's grains, papermaking pulp, vegetable oil, kaolin, white mud, and sludge from environmental protection industries.

　　2. This machine is capable of continuous production, with high production capacity, low unit energy consumption, and high degree of automation, making it particularly suitable for industrial assembly line operations.

　　3. The entire separation process of the machine is carried out in a sealed condition, with no pollution or odor to the environment. Especially suitable for pipeline production.

　　4. The machine has a compact structure, small footprint, easy installation, and simple maintenance. The vulnerable parts - spiral outer edge sprayed with hard alloy or embedded with hard alloy or ceramic pieces - can greatly improve wear resistance and double the service life.

　　5. The parts of the machine that come into contact with materials are made of stainless steel, which has strong corrosion resistance.

　　Centrifugal concentration and dewatering machine integrated equipment, sludge concentration and dewatering machine integrated equipment. Working principle and structure of centrifugal concentration and dewatering machine:

　　A centrifugal dehydrator consists of two rotors, one called a drum and the other a spiral discharger. When the drum rotates at high speed, the slurry inside the drum rotates together with the drum and is subjected to centrifugal force, which is many times greater than gravity. In this way, solid particles will be separated from the liquid and settle on the inner wall of the drum from the axis of the centrifuge drum. The spiral discharger located inside the drum rotates at a speed lower (or higher) than the drum and pushes the deposited solid particles to the slag outlet. The differential speed between the outer drum and the spiral discharger depends on the transmission ratio of the differential.

　　Overview: The components in contact with the material of the centrifuge are all made of stainless steel; Other miscellaneous components that do not come into direct contact with liquids, such as machine bases, main bearing seats, etc., are made of steel, cast iron, or other suitable types of materials.

　　Machine base: The base provides a solid foundation for installing the main components of the machine. The base is a welded component made of steel, and the machined surface of the base is used to support the main bearing seat, the lower shell of the centrifuge, the support base of the feed pipe, and the motor components connected to the base.

　　Cover shell: The cover shell is composed of an upper cover shell and a lower cover shell; There is a sealing gasket on the mating surface of the upper and lower covers to prevent leakage of the machine body. The sealing gasket is made of nitrile rubber or fluororubber (depending on the material). The casing is like a protective cover that completely seals the rotating parts, and of course, the casing also plays a role in discharging solid particles from the rotating parts and containing and guiding them. The casing is divided into a solid slag storage chamber and a liquid storage chamber, and the bottom of the casing is connected to the slag and liquid discharge hoppers through flanges.

　　As shown in the picture:

　　The integrated equipment of centrifugal concentration dewatering machine and sludge concentration dewatering machine has the following overall advantages:

　　1. Good adaptability: Various special requirements of materials and processes for centrifuges have been fully considered in the process, and optimization design has been implemented for the main components in terms of specificity and adjustability. As long as the user explains the installation and use location, physical and chemical properties of material handling, process requirements, etc. before purchasing the machine, we will provide the user with the applicable model.

　　2. High degree of automation: The feeding, separation, unloading, and other processes of the centrifuge during operation are continuously and automatically carried out at high speed. Using programmable controllers to achieve automatic control of centrifugal separation and centrifugal washing processes.

　　3. Good operational stability: The differential used in the centrifuge is a cycloidal or planetary differential, which has the characteristics of high torque and wide adjustment range.

　　4. Strong craftsmanship: The centrifuge adopts a dual motor dual frequency conversion energy feedback differential speed system control, which flexibly and infinitely adjusts the differential speed and adjusts it at any time according to the changes in the material. Truly energy-efficient products.

　　5. Good operating environment: The separation of materials by the centrifuge is carried out under completely sealed conditions, ensuring a clean and pollution-free operating site and maintaining a clean and hygienic production environment, achieving civilized production.

　　6. The safety protection device is complete and reliable: the centrifuge is equipped with multiple protections such as torque protection and power control, which can effectively eliminate or reduce the damage caused by sudden failures to the machine.

　　7. Beautiful appearance: The base of this machine is made of carbon steel welded together, and the surface is treated with special technology to be smooth and flat. Lightweight, generous, and aesthetically pleasing, giving people a sense of overall beauty.

AfterSalesService :

• Centrifugal concentration dewatering machine integrated machine